Rack1R1#sh run int se1/0
Building configuration...
Current configuration : 106 bytes
!
interface Serial1/0 ( P- p to R2)
ip address 155.1.10.1 255.255.255.0
ip ospf 1 area 1
serial restart-delay 0
end
R2
interface Serial1/0 ( p-P to R1)
ip address 155.1.10.2 255.255.255.0
ip ospf 1 area 1
serial restart-delay 0
!
interface Serial1/1 ( P-P to R3)
ip address 155.1.20.2 255.255.255.0
ip ospf 1 area 0
serial restart-delay 0
R3
interface Serial1/0 (P-P tp R2)
ip address 155.1.30.3 255.255.255.0
ip ospf 1 area 1
serial restart-delay 0
!
interface Serial1/1 (P-P tp R4)
ip address 155.1.20.3 255.255.255.0
ip ospf 1 area 0
serial restart-delay 0
R4
interface Serial1/0
ip address 155.1.30.4 255.255.255.0
ip ospf 1 area 1
serial restart-delay 0
end
Rack1R1#pi 155.1.30.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 155.1.30.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 40/51/72 ms
Rack1R1#sh ip rou 155.1.30.4
Routing entry for 155.1.30.0/24
Known via "ospf 1", distance 110, metric 192, type inter area
Last update from 155.1.10.2 on Serial1/0, 00:08:34 ago
Routing Descriptor Blocks:
* 155.1.10.2, from 155.1.20.2, 00:08:34 ago, via Serial1/0
Route metric is 192, traffic share count is 1
Rack1R1#sh ip rou ospf
155.1.0.0/24 is subnetted, 3 subnets
O IA 155.1.30.0 [110/192] via 155.1.10.2, 00:08:53, Serial1/0
O IA 155.1.20.0 [110/128] via 155.1.10.2, 00:09:35, Serial1/0
Thanks and Regards,
Mohan Kumar Devarajan
Molomo <letjedilakopa_at_gmail.com>
Sent by: nobody_at_groupstudy.com
09/05/2009 07:10 AM
Please respond to
Molomo <letjedilakopa_at_gmail.com>
To
ccielab_at_groupstudy.com
cc
Subject
OSPF discontiguous areas
Experts,
I would like to know if the setup below is valid, and whether R1 & R4 will
be able to reach each other.
R1---area 1-----R2---area 0-----R3----area 1-----R4
Regards,
Molomo
Blogs and organic groups at http://www.ccie.net
Received on Sat Sep 05 2009 - 08:19:24 ART
This archive was generated by hypermail 2.2.0 : Sun Oct 04 2009 - 07:42:02 ART