Re: Time Range ACL query

The safest bet is to ask the proctor!

The technically accurate bet is to use 16:59 which takes you THROUGH
16:59:59 which is UP TO 17:00. :)

HTH,

*Scott Morris*, CCIE/x4/ (R&S/ISP-Dial/Security/Service Provider) #4713,

JNCIE-M #153, JNCIS-ER, CISSP, et al.

JNCI-M, JNCI-ER

evil_at_ine.com

Internetwork Expert, Inc.

http://www.InternetworkExpert.com

Toll Free: 877-224-8987

Outside US: 775-826-4344

Knowledge is power.

Power corrupts.

Study hard and be Eeeeviiiil......

Roy Waterman wrote:
> Hi all
>
> I also would like some more clarification on the below post.
> In some workbooks I have seen that for times between 9am and 5pm weekdays,
> its: periodic weekdays 09:00 to 16:59
>
> Does anyone know for certain, whether in the lab you indeed use: periodic
> weekdays 09:00 to 17:00, even though strictly speaking this is not correct?
>
> I've been marked as incorrect for using 17:00 by ASET's grading engine.
>
> Then again, this is always a question Id ask the proctor when the time
> came...
>
>
> 2009/8/5 Darby Weaver <ccie.weaver_at_gmail.com>
>
>
>> I'll be spending Thursday with the Lab Designers - I can ask the question
>> and argue the validity of the next minute or other value to get their
>> input/insight on the matter on more time and perhaps use your example if
>> you
>> like.
>>
>> Some say the lab is all about the wording and I'll agree it is all about
>> the
>> wording. If the labs do a task such as (WRITE IT THIS WAY), then I'm going
>> to (WRITE IT THIS WAY). Nada mas y nada menos, claro. No more and not a
>> letter less.
>>
>>
>>
>> On Tue, Aug 4, 2009 at 8:23 PM, Darby Weaver <ccie.weaver_at_gmail.com>
>> wrote:
>>
>>
>>> I feel ya. I asked this one to the lab designer at Cisco Live.
>>>
>>> The answer is simple - do what the lab says to do.
>>>
>>> Thus... if it says 1600 to 1800 for example...
>>>
>>> The grading script is going to be looking for those values and not
>>>
>> anything
>>
>>> else.
>>>
>>> Anyone else can argue the semantics and how the command works. The lab
>>>
>> is
>>
>>> not quite that ornate on wording - if they ask for a certain value,
>>>
>> chances
>>
>>> are they want EXACTLY/VERBATIM what they are asking for.
>>>
>>> Or at least that is what the script is going to look for.
>>>
>>> Let's put it this way:
>>>
>>> Guys who pass never know what they passed on.
>>>
>>> Guys who fail do get a score report that might be vague but might not be
>>> too vague if the math is correct. If one gets 100% in a section and uses
>>>
>> a
>>
>>> certain nomenclature then there is a possibility that it stands to be
>>> correct.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Aug 4, 2009 at 6:42 PM, Fernando Maura <fermaura_at_gmail.com>
>>>
>> wrote:
>>
>>>> Hi guys, I believe that you have already discuss this topic several
>>>>
>> times,
>>
>>>> but since I'm new here i have to ask you again, since I have encounter
>>>> differents opinion about this.
>>>> the question is about the values when using time-range, TCP intercept
>>>>
>> and
>>
>>>> some other similar values, here is the thing, I have been study from
>>>> different vendors IE, netmasterclass and the use different in their
>>>>
>> guides.
>>
>>>> example 1: an exercise say configure you router to start closing TCP
>>>> session after they have EXCEEDED 1000 and if the ammount of connections
>>>>
>> fall
>>
>>>> BELOW 500 start accepting connections again.
>>>>
>>>> in this case for me the keywords are EXCEEDED and BELOW, the value for
>>>> exceeded is 1001 and the value for BELOW is 499, but in the guides are
>>>>
>> 1000
>>
>>>> and 500 straigth
>>>>
>>>> Example 2: block traffic from HTTP from 8 AM to 5 PM.
>>>>
>>>> i this case with the use of TIME-RANGE acl, the start time will be 08:00
>>>> and the end time will be 16:59 (when you press the ? the help says that
>>>>
>> the
>>
>>>> en time is the begin of the next minute). but once more i find in the
>>>>
>> guides
>>
>>>> that their using 08:00 and 17:00 values.
>>>>
>>>> I now that this could be find "LAME questions" but I will take the LAB
>>>>
>> in
>>
>>>> 15 days and dont whant to loose point cause of this.
>>>>
>>>> Recomendations of what values to use?
>>>>
>>>> Best Regards
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 21 2009 - 08:06:46 ART