try
I am assuming you are doing AD-HOC conferencing.
"maximum conference-participants 4"  in conference bridge config and test a
call.
-frog
On Tue, Nov 24, 2009 at 4:48 PM, sameer inam <i_sameer_at_hotmail.com> wrote:
> Guys,
>
>
>
> I need your help regarding the conferncing calls issue using G.729 codec.
> porblem which I m facing at the moment after configuring the trancoding and
> confernce configuration on Router and Call manager 4.1 , when ever I add
> third
> IP phone on confernce call line goes drop , please see below configuration
> of
> router and sh diag results , any idea ?
>
>
>
>
>
>
>  pri-group timeslots 1-31
>  description PRI_3816500 [6500-6599]
> !
> controller E1 1/1
> !
> translation-rule 1
>  Rule 1 ^. 9
> !
> gw-accounting aaa
>  acct-template callhistory-detail
> !
> !
> !
> !
> !
> interface FastEthernet0/0
>  description UPLINK to KBR-CORE  Layer-3
>  ip address 34.108.253.26 255.255.255.252
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip route-cache flow
>  load-interval 30
>  duplex full
>  speed 100
>  no mop enabled
>  h323-gateway voip interface
>  h323-gateway voip bind srcaddr 34.108.253.26
> !
> interface FastEthernet0/1
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
> !
> interface Serial1/0:15
>  no ip address
>  encapsulation hdlc
>  isdn switch-type primary-net5
>  isdn incoming-voice voice
>  no cdp enable
> !
> ip route 0.0.0.0 0.0.0.0 34.108.253.25
> !
> ip http server
> no ip http secure-server
> ip tacacs source-interface FastEthernet0/0
>
> !
> !
> tacacs-server host 34.64.0.169
> tacacs-server host 34.96.0.99
> tacacs-server directed-request
> tacacs-server key 7 11390B551307084D557A25
> !
> control-plane
> !
> !
> !
> voice-port 1/0:15
>  translate calling 1
>  echo-cancel coverage 24
> !
> !
> !
> sccp local FastEthernet0/0
> sccp ccm 34.108.23.10 identifier 1 version 4.1
> sccp ccm 34.108.23.20 identifier 2 version 4.1
> sccp
> !
> sccp ccm group 10
>  bind interface FastEthernet0/0
>  associate ccm 1 priority 1
>  associate ccm 2 priority 2
>  associate profile 1 register XCD001bd48e3a70
>  associate profile 2 register CFB001bd48e3a70
> !
> dspfarm profile 1 transcode
>  codec g711ulaw
>  codec g711alaw
>  codec g729ar8
>  codec g729abr8
>  codec g729r8
>  maximum sessions 6
>  associate application SCCP
> !
> dspfarm profile 2 conference
>  codec g711ulaw
>  codec g711alaw
>  codec g729ar8
>  codec g729abr8
>  codec g729r8
>  codec g729br8
>  maximum sessions 2
>  associate application SCCP
> !
> dspfarm profile 3 mtp
>  codec g711ulaw
>  maximum sessions software 10
>  associate application SCCP
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 1 pots
>  destination-pattern 9[2-9]......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  forward-digits 7
> !
> dial-peer voice 2 pots
>  destination-pattern 9050.......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 050
> !
> dial-peer voice 3 pots
>  destination-pattern 90[2-4].......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 0
> !
> dial-peer voice 4 pots
>  destination-pattern 90[6-7].......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 0
> !
> dial-peer voice 5 pots
>  destination-pattern 909.......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 09
> !
> dial-peer voice 6 pots
>  destination-pattern 900T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 00
> !
> dial-peer voice 8 pots
>  destination-pattern 1..
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  forward-digits all
> !
> dial-peer voice 10 pots
>  destination-pattern 91..
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 1
> !
> dial-peer voice 7 pots
>  destination-pattern 999
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  forward-digits all
> !
> dial-peer voice 9 pots
>  destination-pattern 9999
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 999
> !
> dial-peer voice 600 voip
>  preference 1
>  destination-pattern 5..
>  voice-class codec 10
>  session target ipv4:34.108.23.20
>  dtmf-relay h245-alphanumeric
>  fax rate disable
>  ip qos dscp cs5 media
>  ip qos dscp cs5 signaling
>  no vad
> !
> dial-peer voice 500 voip
>  preference 2
>  destination-pattern 5..
>  voice-class codec 10
>  session target ipv4:34.108.23.10
>  dtmf-relay h245-alphanumeric
>  fax rate disable
>  ip qos dscp cs5 media
>  ip qos dscp cs5 signaling
>  no vad
> !
> dial-peer voice 12 pots
>  destination-pattern 9800T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 800
> !
> dial-peer voice 13 pots
>  destination-pattern 98000T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 8000
> !
> dial-peer voice 14 pots
>  destination-pattern 9600T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  prefix 600
> !
> dial-peer voice 15 pots
>  destination-pattern 9055.......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 055
> !
> dial-peer voice 16 pots
>  destination-pattern 9056.......
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  progress_ind progress enable 8
>  direct-inward-dial
>  port 1/0:15
>  prefix 056
> !
> dial-peer voice 11 pots
>  incoming called-number 5..
>  direct-inward-dial
> !
> !
> -DXB-TCN-K-R3-VGW#sh diag
> ot 0:
>      C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports
>      Port adapter is analyzed
>      Port adapter insertion time unknown
>      EEPROM contents at hardware discovery:
>      PCB Serial Number        : FOC11172S6E
>      Hardware Revision        : 1.0
>      Top Assy. Part Number    : 800-26920-03
>      Board Revision           : A0
>      Deviation Number         : 0
>      Fab Version              : 03
>      RMA Test History         : 00
>      RMA Number               : 0-0-0-0
>      RMA History              : 00
>      Processor type           : 87
>      Hardware date code       : 20070426
>      Chassis Serial Number    : FCZ112573FR
>      Chassis MAC Address      : 001b.d48e.3a70
>      MAC Address block size   : 24
>      CLEI Code                : COM7C00ARA
>      Product (FRU) Number     : CISCO2811
>      Part Number              : 73-10258-04
>      Version Identifier       : V04
>      EEPROM format version 4
>      EEPROM contents (hex):
>        0x00: 04 FF C1 8B 46 4F 43 31 31 31 37 32 53 36 45 40
>        0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28 03 42 41 30
>        0x20: 88 00 00 00 00 02 03 03 00 81 00 00 00 00 04 00
>        0x30: 09 87 83 01 32 40 1A C2 8B 46 43 5A 31 31 32 35
>        0x40: 37 33 46 52 C3 06 00 1B D4 8E 3A 70 43 00 18 C6
>        0x50: 8A 43 4F 4D 37 43 30 30 41 52 41 CB 8F 43 49 53
>        0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 28 12
>        0x70: 04 89 56 30 34 20 D9 02 40 C1 FF FF FF FF FF FF
>
>      PVDM Slot 0:
>      16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
>      Hardware Revision        : 4.0
>      Part Number              : 73-8538-05
>      Board Revision           : B0
>      Deviation Number         : 0
>      Fab Version              : 04
>      PCB Serial Number        : FOC11174U33
>      RMA Test History         : 00
>      RMA Number               : 0-0-0-0
>      RMA History              : 00
>      Processor type           : 00
>      Product (FRU) Number     : PVDM2-16
>      Version Identifier       : V01
>      EEPROM format version 4
>      EEPROM contents (hex):
>        0x00: 04 FF 40 03 EF 41 04 00 82 49 21 5A 05 42 42 30
>        0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 31 31 37
>        0x20: 34 55 33 33 03 00 81 00 00 00 00 04 00 09 00 CB
>        0x30: 88 50 56 44 4D 32 2D 31 36 89 56 30 31 20 D9 02
>        0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>        0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>        0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>        0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
>      PVDM Slot 1:
>      48-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
>      Hardware Revision        : 4.0
>      Part Number              : 73-8540-05
>      Board Revision           : B0
>      Deviation Number         : 0
>      Fab Version              : 04
>
> Slot 1:
>        High Density Voice NM-HDV2-2T1/E1 Port adapter
>        Port adapter is analyzed
>        Port adapter insertion time unknown
>        EEPROM contents at hardware discovery:
>        Hardware Revision        : 1.1
>        Top Assy. Part Number    : 800-22168-02
>        Board Revision           : B0
>        Deviation Number         : 0
>        Fab Version              : 04
>        PCB Serial Number        : FOC084919H2
>        RMA Test History         : 00
>        RMA Number               : 0-0-0-0
>        RMA History              : 00
>        Fab Part Number          : 28-6126-04
>        Manufacturing Test Data  : 00 00 00 00 00 00 00 00
>        Field Diagnostics Data   : 00 00 00 00 00 00 00 00
>        Product (FRU) Number     : NM-HDV2-2T1/E1
>        Version Identifier       : V02
>        EEPROM format version 4
>        EEPROM contents (hex):
>          0x00: 04 FF 40 03 DB 41 01 01 C0 46 03 20 00 56 98 02
>          0x10: 42 42 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 30
>          0x20: 38 34 39 31 39 48 32 03 00 81 00 00 00 00 04 00
>          0x30: 85 1C 17 EE 04 C4 08 00 00 00 00 00 00 00 00 C5
>          0x40: 08 00 00 00 00 00 00 00 00 CB 8E 4E 4D 2D 48 44
>          0x50: 56 32 2D 32 54 31 2F 45 31 89 56 30 32 20 D9 02
>          0x60: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
>        FPGA revision:0x16C
>        WIC Slot 1:
>        HDV2 on board t1/e1 controller (2 port)
>
>
>
>
>
> _________________________________________________________________
> Keep your friends updated even when you re not signed in.
>
> http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci
> al-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_5:092010<http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci%0Aal-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_5:092010>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Fri Nov 27 2009 - 02:25:20 ART
This archive was generated by hypermail 2.2.0 : Tue Dec 01 2009 - 06:36:29 ART