Re: Frame-relay VAF and VATS not kicking it

I have not tried this myself, but just thinking out loud here, do you have
the other side configured as well for end to end?

Here is a link I found:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_vats.html

Quite a bit to this.

Also, I did not think you could configure the shape peak and shape average
commands for a single class. I thought these two were exclusive ... it is
one or the other. Does not make sense IMO to configure both for the same
class within a policy-map.

Your thoughts? HTH,

Andrew Lee Lissitz

On Fri, Jan 8, 2010 at 10:25 PM, Jorge Cortes
<jorge.cortes.cano_at_gmail.com>wrote:

> Hi Team,
>
> I am not able to get VAF and VATS to work properly. Both show as
> inactive even when there are packets in the LLQ. I don't know what I
> am doing wrong, so I would appreciate any help with this issue.
>
> This is the output of command "show frame-relay pvc 305"
>
> Rack1R5#sh frame-relay pvc 503
>
> PVC Statistics for interface Serial0/0/0 (Frame Relay DTE)
>
> DLCI = 503, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
>
> input pkts 10882 output pkts 10403 in bytes 897945
> out bytes 2068873 dropped pkts 0 in pkts dropped 0
> out pkts dropped 0 out bytes dropped 0
> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
> out BECN pkts 0 in DE pkts 0 out DE pkts 0
> out bcast pkts 270 out bcast bytes 125360
> 5 minute input rate 12000 bits/sec, 24 packets/sec
> 5 minute output rate 13000 bits/sec, 24 packets/sec
> pvc create time 02:22:58, last time pvc status changed 00:12:02
> fragment type end-to-end fragment size 480 adaptive inactive
> =======================> VAF is configured but inactive
> service policy DLCI503
> Serial0/0/0: DLCI 503 -
>
> Service-policy output: DLCI503
>
> Class-map: class-default (match-any)
> 5206 packets, 395428 bytes
> 30 second offered rate 13000 bps, drop rate 0 bps
> Match: any
> Traffic Shaping
> Target/Average Byte Sustain Excess Interval Increment
> Rate Limit bits/int bits/int (ms) (bytes)
> 56000/32000 1400 6400 4800 200 1400
>
> Adapt Queue Packets Bytes Packets Bytes Shaping
> Active Depth Delayed Delayed Active
> BECN 0 0 0 0 0 no
> Voice Adaptive Shaping inactive
> ======================================>VATS is configured but inactive
>
> Service-policy : VOICE
>
> Class-map: VOICE (match-all)
> 5049 packets, 323136 bytes
> 30 second offered rate 12000 bps, drop rate 0 bps
> ===========================> There is traffic in the LLQ
> Match: dscp ef (46)
> Queueing
> Strict Priority
> Output Queue: Conversation 24
> Bandwidth 32 (kbps) Burst 800 (Bytes)
> (pkts matched/bytes matched) 0/0
> (total drops/bytes drops) 0/0
>
> Class-map: class-default (match-any)
> 157 packets, 72292 bytes
> 30 second offered rate 0 bps, drop rate 0 bps
> Match: any
> Output queue size 0/max total 600/drops 0
>
>
> These are the relevant configurations:
>
> interface Serial0/0/0
> ip address 155.1.0.5 255.255.255.0
> ip rip advertise 10
> encapsulation frame-relay
> load-interval 30
> frame-relay fragmentation voice-adaptive deactivation 30
> frame-relay map ip 155.1.0.1 501 broadcast
> frame-relay map ip 155.1.0.2 502 broadcast
> frame-relay map ip 155.1.0.3 503 broadcast
> frame-relay map ip 155.1.0.4 504 broadcast
> frame-relay interface-dlci 502
> class DLC502
> frame-relay interface-dlci 503
> class DLC503
> no frame-relay inverse-arp
>
> map-class frame-relay DLC502
> frame-relay fragment 480
> service-policy output DLCI502
>
> map-class frame-relay DLC503
> frame-relay fragment 480
> service-policy output DLCI503
>
> policy-map DLCI503
> class class-default
> shape peak 32000 6400 4800
> shape adaptive 32000
> shape fr-voice-adapt deactivation 30
> service-policy VOICE
>
> policy-map DLCI502
> class class-default
> shape peak 256000 12800 12800
> shape adaptive 256000
> shape fr-voice-adapt deactivation 30
> set fr-de
> service-policy VOICE
>
> policy-map VOICE
> class VOICE
> priority 32
>
>
> Thanks,
>
> Jorge
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net