Re: FR-VLAN Interworking not working

Hi Service provider,

To me some configuration missing/inconsistency look on the PE router and CE1
router.

Few of them are.

One the CE1 i am not able to find the interface with address 10.1.12.1/24
so to which interface address you are pinging from CE2... pls clarify the
same.

On the PE1 and PE2 in pseudowire class remove the " interworking ethernet"
and add " interworking ip" for interworking to work.

In addition it is recoomended to add "ip local interfac address <address>"
in the pseudowire class.

Pls check and let me know if it is working.

Thanks
Satinder

On Wed, Jan 13, 2010 at 12:37 AM, Service Provider <
service.providersa_at_gmail.com> wrote:

> Hi all
>
> I have setup FR-VLAN Interworking and my l2 tunnel is up but cannot ping
> between CE sites.
>
>
> CE1-----FRSW-------PE1-----------------PE2---------------------VLAN100--------------------CE2
>
> Configs below, please help....tx.
>
> CE1#
> CE1#sh run
> Building configuration...
>
> Current configuration : 1912 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname CE1
> !
> boot-start-marker
> boot-end-marker
> !
> enable password cisco
> !
> ip subnet-zero
> !
> !
> ip cef
> no ip domain-lookup
> ip ssh time-out 120
> ip ssh authentication-retries 3
> no mpls traffic-eng auto-bw timers frequency 0
> bridge irb
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> no clns route-cache
> !
> interface Serial1/0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> serial restart-delay 0
> no clns route-cache
> frame-relay map bridge 101 broadcast
> frame-relay map bridge 100 broadcast
> no frame-relay inverse-arp
> bridge-group 1
> !
> interface Serial1/1
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/2
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/3
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/4
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/5
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/6
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/7
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface BVI1
> ip address 10.10.10.1 255.255.255.0
> no ip directed-broadcast
> no clns route-cache
> !
> ip classless
> !
> !
> !
> control-plane
> !
> bridge 1 protocol ieee
> bridge 1 route ip
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> stopbits 1
> line aux 0
> exec-timeout 0 0
> privilege level 15
> stopbits 1
> line vty 0 4
> password cisco
> login
> !
> no cns aaa enable
> end
>
>
> ce2#
> ce2#sh run
> Building configuration...
>
> Current configuration : 810 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname ce2
> !
> boot-start-marker
> boot-end-marker
> !
> !
> ip subnet-zero
> !
> !
> ip cef
> ip ssh time-out 120
> ip ssh authentication-retries 3
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface FastEthernet1/0
> no ip address
> no ip directed-broadcast
> duplex half
> speed auto
> !
> interface FastEthernet1/0.100
> encapsulation dot1Q 100
> ip address 10.1.12.2 255.255.255.0
> no ip directed-broadcast
> !
> interface FastEthernet1/1
> no ip address
> no ip directed-broadcast
> shutdown
> duplex half
> speed auto
> !
> ip classless
> !
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> stopbits 1
> line aux 0
> stopbits 1
> line vty 0 4
> login
> !
> no cns aaa enable
> end
>
> PE1#sh run
> Building configuration...
>
> Current configuration : 2311 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname PE1
> !
> boot-start-marker
> boot-end-marker
> !
> enable password cisco
> !
> ip subnet-zero
> !
> !
> ip cef
> no ip domain-lookup
> ip ssh time-out 120
> ip ssh authentication-retries 3
> mpls label protocol ldp
> no mpls traffic-eng auto-bw timers frequency 0
> frame-relay switching
> !
> !
> pseudowire-class l2inter
> encapsulation mpls
> interworking ethernet
> !
> pseudowire-class INTERWORKING
> encapsulation mpls
> interworking ethernet
> !
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> no ip directed-broadcast
> no clns route-cache
> !
> interface Loopback1
> no ip address
> no ip directed-broadcast
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> no clns route-cache
> !
> interface Serial1/0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/1
> ip address 150.1.12.1 255.255.255.0
> no ip directed-broadcast
> mpls label protocol ldp
> tag-switching ip
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/2
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/3
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/4
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/5
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/6
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> interface Serial1/7
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> no clns route-cache
> !
> router ospf 1
> router-id 1.1.1.1
> log-adjacency-changes
> network 1.1.1.1 0.0.0.0 area 0
> network 13.13.13.1 0.0.0.0 area 0
> network 0.0.0.0 255.255.255.255 area 0
> !
> ip classless
> !
> !
> connect FR-VLAN-IW Serial1/0 101 l2transport
> xconnect 2.2.2.2 100 pw-class INTERWORKING
> !
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> stopbits 1
> line aux 0
> exec-timeout 0 0
> privilege level 15
> stopbits 1
> line vty 0 4
> password cisco
> login
> !
> no cns aaa enable
> end
>
>
>
> pe2#sh run
> Building configuration...
>
> Current configuration : 1997 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname pe2
> !
> boot-start-marker
> boot-end-marker
> !
> !
> ip subnet-zero
> !
> !
> ip cef
> no ip domain-lookup
> ip ssh time-out 120
> ip ssh authentication-retries 3
> !
> !
> pseudowire-class l2inter
> encapsulation mpls
> interworking ethernet
> !
> !
> interface Loopback0
> ip address 150.1.2.2 255.255.255.255
> no ip directed-broadcast
> !
> interface Loopback2
> ip address 2.2.2.2 255.255.255.255
> no ip directed-broadcast
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface Serial1/0
> ip address 150.1.12.2 255.255.255.0
> no ip directed-broadcast
> mpls label protocol ldp
> tag-switching ip
> serial restart-delay 0
> !
> interface Serial1/1
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/2
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/3
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/4
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/5
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/6
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface Serial1/7
> no ip address
> no ip directed-broadcast
> shutdown
> serial restart-delay 0
> !
> interface FastEthernet2/0
> no ip address
> no ip directed-broadcast
> no keepalive
> duplex half
> speed auto
> !
> interface FastEthernet2/0.100
> encapsulation dot1Q 100
> no ip directed-broadcast
> xconnect 1.1.1.1 100 pw-class l2inter
> !
> interface FastEthernet2/1
> no ip address
> no ip directed-broadcast
> shutdown
> duplex half
> speed auto
> !
> router ospf 1
> log-adjacency-changes
> network 0.0.0.0 255.255.255.255 area 0
> !
> ip classless
> !
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> stopbits 1
> line aux 0
> stopbits 1
> line vty 0 4
> login
> !
> no cns aaa enable
> end
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Satinder Singh
mobile 09980075998
Blogs and organic groups at http://www.ccie.net