Re: OSPF filtering

I sent diagram in attachment as jpg pic. Is it visible?

On Sat, Jan 23, 2010 at 2:42 AM, Narbik Kocharians <narbikk_at_gmail.com> wrote:
> Ivan
>
> Can you draw the diagram?
>
> On Fri, Jan 22, 2010 at 5:02 PM, Ivan Hrvatska <ivanzghr_at_gmail.com> wrote:
>>
>> Anybody?
>>
>> On Fri, Jan 22, 2010 at 4:15 PM, Ivan Hrvatska <ivanzghr_at_gmail.com> wrote:
>> > Hi,
>> >
>> > I have situation (see pic) where my traffic goes through backup links
>> > because it is same area. It should go through area 0. I cannot change
>> > the fact that area 212 is stub and I cannot influence on areas. What
>> > can I do to make traffic goes through area 0 between Location 1 and
>> > Location 2? In area 0 ABR routers summarize networks and filter out
>> > only summarize networks originated in Area 0. Also, they advertise to
>> > Location 1 only summarized route to Location 2 and vice verse.
>> > My question is how can I manipulate in this design so that transit
>> > through area 0 should be PRIMARY and through ME backup only if primary
>> > fails.
>> >
>> > Regards
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
>
> --
> Narbik Kocharians
> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining.com
> Sr. Technical Instructor
> YES! We take Cisco Learning Credits!
> Training And Remote Racks available

Blogs and organic groups at http://www.ccie.net
Received on Sat Jan 23 2010 - 11:27:59 ART