EEM Applet wih CLI

Hello GS,

I'm currently working with the EEM.
So this is really new stuff for me..

I have the following task:

Configure an EventManager Applet wich shows the first 15 lines of the
output "show cpu processes".
Now I don't know what I should configure in the action command.

This is my config:

event manager applet test

action 100 cli command enable
action 200 cli command "show processes cpu"

The result shows about 20+ lines.
See output below:
####################################################

*Mar 2 03:47:49.589: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : IN :
Rack19R3#show processes cpu
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
CPU utilization for five seconds: 5%/99%; one minute: 6%; five minutes:
6%
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
1 0 65 0 0.00% 0.00% 0.00% 0 Chunk
Manager
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
2 68456 20011 3420 0.08% 0
Rack19R3#.08% 0.08% 0 Load Meter
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
3 5548 21434 258 0.00% 0.00% 0.00% 0 OSPF-1
Hello
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
4 0 1 0 0.00% 0.00% 0.00% 0
EDDRI_MAIN
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
5 91676 11946 7674 0.81% 0.16% 0.08% 0 Check
heaps
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
6 8 2 4000 0.00% 0.00% 0.00% 0 Pool
Manager
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
7 0 2 0 0.00% 0.00% 0.00% 0
Timers
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
8 0 1 0 0.00% 0.00% 0.00% 0 OIR
Handler
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify :
Rack19R3#DEBUG(cli_lib) : : OUT : 9 0 1 0
0.00% 0.00% 0.00% 0 Crash writer
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
10 32 3336 9 0.00% 0.00% 0.00% 0
Environmental mo
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
11 8 1668 4 0.00% 0.00% 0.00% 0 IPC Dynamic
Cach
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
12 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone
Manager
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
13 51624 99982 516 0.00% 0.02% 0.04% 0 IPC
Periodic Tim
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
14 49824 99982 498 0.00% 0.01% 0.04% 0 IPC
Deferred Por
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
15 0 1 0 0.00% 0.00% 0.0
Rack19R3#0% 0 IPC Seat Manager
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
16 0 1 0 0.00% 0.00% 0.00% 0 IPC
BackPressure
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
17 32 14 2285 0.00% 0.00% 0.00% 0 ARP
Input
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : OUT :
18 6492 104316 62 0.00% 0.00% 0.00% 0 ARP
Background
*Mar 2 03:47:49.653: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : CTL : 20
+ lines read from cli, debug output truncated
*Mar 2 03:47:49.657: %HA_EM-6-LOG: verify : DEBUG(cli_lib) : : CTL :
cli_close called.
#######################################################################
When I configure additional "action 150 cli command "terminal length 15"
the output shows nothing.

So can anyone help me what to do if I want to see only the firs 15 lines
of this output ?

Regards

Dennis

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 24 2010 - 15:08:21 ART