Re: VSS question on oversubscription

no, only the first port of the port group

router(config)#[no] hw-module slot x oversubscription port-group y

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html
<http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html>

-- 
-- 
Sincerely,
Shawn Zandi
Network Architect and Consultant
Cisco Certified CCIE x2 (R&S + Security)
Juniper JNCIS x2 (ER & SEC) - Foundry/Brocade BCNE - Procurve Master ASE
(MASE)
Dubai Internet City
web: http://www.shafagh.com
blog: http://blog.shafagh.com
email: shafagh_at_shafagh.com
On Sat, Mar 13, 2010 at 11:55 PM, Shawn Zandi <szmetal_at_gmail.com> wrote:
> Naufal,
> I assume you're referring to Xenpak, (VSL works on 10G - and it won't work
> on all 10G ports e.g it  X6704 is not VSL capable) ...
>
> on WS-X6716-10G only non-oversubscribed ports can be used for
> VSL... performance mode (1 port used per port group)
>
>
> http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html
>
> --
> --
> Sincerely,
> Shawn Zandi
> Network Architect and Consultant
> Cisco Certified CCIE x2 (R&S + Security)
> Dubai Internet City
> blog: http://blog.shafagh.com
> email: shafagh_at_shafagh.com
>
>
> On Sat, Mar 13, 2010 at 11:18 PM, Naufal Jamal <naufalccie_at_yahoo.in>wrote:
>
>> Hi All,
>>
>> I am configuring VSS on the 16 port GBIC module. there should be 4
>> port-groups
>> in the card. My question is that if i want to make a VSL link in this can
>> i
>>  use only the first port in each port group? ie 1st,5th,9th,13th or can I
>> use
>> any port in a port-group? If yes, what is the reason for that. I know it
>> could
>> only work in performance mode. I gave the no hw-module....... command for
>> that. Pls help ..
>> NFL
Blogs and organic groups at http://www.ccie.net