Hi Andy,
how does PFR check link quality and integrity - does it send peroidic
packets for check on link end to end ( in MPLS enviornment CE-to- CE )?
what will happen if there is flap in one link , will it fall over to other
link ?
On Sun, Apr 4, 2010 at 11:44 PM, Andy Reid <ccie_at_reid.it> wrote:
> I have created a configuration that appears to work - by creating an
> oer-map referencing the MGMT application "refname". I then fed the oer-map
> back into the MC configuration using the policy-rules statement. The Telnet
> traffic is now being captured correctly:
>
> Rack1R6# show run | se oer
> oer master
> policy-rules MANAGEMENT
> logging
> !
> border 150.1.4.4 key-chain OER
>  interface FastEthernet0/0 external
>  interface FastEthernet0/1 internal
>  interface Serial0/2/0 external
> !
> border 150.1.6.6 key-chain OER
>  interface FastEthernet0/0.67 external
>  interface FastEthernet0/0.146 internal
>  interface Serial0/1/0 external
> !
> learn
>  throughput
>  delay
>  periodic-interval 0
>  monitor-period 1
>  list seq 1 refname MGMT
>  traffic-class application nbar telnet
>  aggregation-type prefix-length 32
>  delay
> periodic 90
> !
> oer border
> local Loopback0
> master 150.1.6.6 key-chain OER
> oer-map MANAGEMENT 10
> match oer learn list MGMT
>
>
> *Apr  4 17:39:24.010: %OER_MC-5-NOTICE: Discovered Exit for Appl Prefix
> 150.1.8.8/32 telnet, BR 150.1.4.4, i/f Se0/2/0
> Rack1R6#show oer master traffic-class learned list MGMT
>
> OER Prefix Statistics:
> Pas - Passive, Act - Active, S - Short term, L - Long term, Dly - Delay
> (ms),
> P - Percentage below threshold, Jit - Jitter (ms),
> MOS - Mean Opinion Score
> Los - Packet Loss (packets-per-million), Un - Unreachable
> (flows-per-million),
> E - Egress, I - Ingress, Bw - Bandwidth (kbps), N - Not applicable
> U - unknown, * - uncontrolled, + - control more specific, @ - active probe
> all
> # - Prefix monitor mode is Special, & - Blackholed Prefix
> % - Force Next-Hop, ^ - Prefix is denied
>
> DstPrefix           Appl_ID Dscp Prot     SrcPort     DstPort SrcPrefix
>              Flags             State     Time            CurrBR  CurrI/F
> Protocol
>        PasSDly  PasLDly   PasSUn   PasLUn  PasSLos  PasLLos      EBw
>  IBw
>        ActSDly  ActLDly   ActSUn   ActLUn  ActSJit  ActPMOS  ActSLos
>  ActLLos
>
> --------------------------------------------------------------------------------
> 150.1.2.2/32         telnet defa    N           N           N 0.0.0.0/0
>                              INPOLICY*      @70         150.1.4.4  Se0/2/0
>      U
>             48       48        0        0    19073    19073        1
>  6
>             59       59        0        0        N        N        N
>  N
>
> 150.1.8.8/32         telnet defa    N           N           N 0.0.0.0/0
>                               DEFAULT*      @44         150.1.4.4  Se0/2/0
>      U
>              U        U        0        0        0        0        1
>  0
>              U        U        0        0        N        N        N
>  N
>
>
>
> Rack1R6#show oer master
> OER state: ENABLED and ACTIVE
>  Conn Status: SUCCESS, PORT: 3949
>  Version: 2.2
>  Number of Border routers: 2
>  Number of Exits: 4
>  Number of monitored prefixes: 3 (max 5000)
>  Max prefixes: total 5000 learn 2500
>  Prefix count: total 3, learn 2, cfg 0
>  PBR Requirements met
>  Nbar Status: Active
>
> Border           Status   UP/DOWN             AuthFail  Version
> 150.1.6.6        ACTIVE   UP       00:03:22          0  2.2
> 150.1.4.4        ACTIVE   UP       00:03:22          0  2.2
>
>
> Global Settings:
>  max-range-utilization percent 20 recv 0
>  mode route metric bgp local-pref 5000
>  mode route metric static tag 5000
>  trace probe delay 1000
>  logging
>  exit holddown time 60 secs, time remaining 0
>
> Default Policy Settings:
>  backoff 300 3000 300
>  delay relative 50
>  holddown 300
>  periodic 90
>  probe frequency 56
>  number of jitter probe packets 100
>  mode route observe
>  mode monitor both
>  mode select-exit good
>  loss relative 10
>  jitter threshold 20
>  mos threshold 3.60 percent 30
>  unreachable relative 50
>  resolve delay priority 11 variance 20
>  resolve range priority 12 variance 0
>  resolve utilization priority 13 variance 20
>
> Learn Settings:
>  current state : STARTED
>  time remaining in current state : 67 seconds
>
>  throughput
>  delay
>  no inside bgp
>  no protocol
>  monitor-period 1
>  periodic-interval 0
>  aggregation-type prefix-length 24
>  prefixes 100
>  expire after time 720
>
>  Learn-List seq 1 refname MGMT
>
>   Configuration:
>    Traffic-Class Application: telnet
>    Aggregation-type: prefix-length 32
>
>    Learn type: delay
>    Session count: 50 Max count: 100
>    Policies assigned: 10
>   Stats:
>    Traffic-Class Count: 1
>
>
>
> regards Andy
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 04 2010 - 23:49:21 ART
This archive was generated by hypermail 2.2.0 : Sat May 01 2010 - 09:49:56 ART