Re: OT- Wireless LAP to AP 1131AG-E-K9

Here is how I did it (but you need a second AP that has the code you need)

On a working AP
ap1#archive tar /create c1130-k9w7-mx.123-7.JA1.tar
/c1130-k9w7-mx.123-7.JA1

This tar9s everything in the folder /c1130-k9w7-mx.123-7.JA1 to tar file
called c1130-k9w7-mx.123-7.JA1.tar
(200+ files in 20+ folders)

(On the AP9s everything except the config file is in a folder)

So on the non working one I used the aironet ROMmon equivalent (called ap:
mode) to wipe the flash and copy the ios. Then I booted into the ios (tons
of errors because non of the software for the radio was on the flash) then
I copied over the tar from the first step and then ran

Archive tar /xtract <tar file from step 1> /<folder to put it in>

Actual commands were....

ap2#mkdir c1130-k9w7-mx.123-7.JA1
ap2#archive tar /xtract c1130-k9w7-mx.123-7.JA1.tar
/c1130-k9w7-mx.123-7.JA1

This created all folders and files.
I then deleted the original IOS that I used for recovery and rebooted.

The first time I did this it took an hour... The second one took 5
minutes...

Email direct at the address below if I can help further

-- 
Stephen L. Robinson
srobinson_at_qtzl.com 
> From: jockey wearer <jockeywearer_at_gmail.com>
> Reply-To: jockey wearer <jockeywearer_at_gmail.com>
> Date: Wed, 7 Apr 2010 17:41:02 +0300
> To: group-study <ccielab_at_groupstudy.com>
> Subject: OT- Wireless LAP to AP 1131AG-E-K9
> 
> Dear champs ,
> 
> I want to convert Cisco LAP to AP .I have cisco AIR-LAP 1131AG-E-K9 wireless
> lightweight accesspoint .
> any procedure how to convert LAP  to AP ? I  know procedure from AP to LAP .
> 
> Thanks
> Prashant
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net