"Cisco certification" <cisco@groupstudy.com>, "Cisco

map-class frame-relay R1-to-R7
 frame-relay cir 2048000
 frame-relay bc 256000
 frame-relay mincir 1024000
 frame-relay adaptive-shaping interface-congestion 25

here if the interface has more than 25 packets
than it will switch to MINCIR

i like to know how to verify the status of adaptive shaping
i tried this
R1#sh frame-relay pvc 107

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

DLCI = 107, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

  input pkts 1403 output pkts 1344 in bytes 1742200
  out bytes 1649744 dropped pkts 0 in pkts dropped 0

  out pkts dropped 0 out bytes dropped 0
  in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
  out BECN pkts 0 in DE pkts 0 out DE pkts 0
  out bcast pkts 0 out bcast bytes 0
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  pvc create time 01:57:09, last time pvc status changed 01:55:29
  cir 2048000 bc 256000 be 0 byte limit 8192 interval 32
  mincir 1024000 byte increment 8192 *Adaptive Shaping IF_CONG*
  pkts 1339 bytes 1649224 pkts delayed 385 bytes delayed 511060

  shaping inactive
  traffic shaping drops 0
  Queueing strategy: fifo
  Output queue 0/40, 0 drop, 385 dequeued

I like to know how to verify the adaptive shaping is configured properly or
not

Regards,
Prakash kalsaria
http://prakashkalsaria.wordpress.com

Blogs and organic groups at http://www.ccie.net
Received on Thu Jun 17 2010 - 13:22:59 ART