RE: 7606 or 7609 'show module' output

Here is my 6500
6500-DataCenter#sh module
Load for five secs: 2%/1%; one minute: 5%; five minutes: 5%
Time source is NTP, 10:50:22.850 EDT Tue Jun 22 2010

Mod Ports Card Type Model Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1 48 48 port 10/100/1000mb EtherModule WS-X6148V-GE-TX
SAL09179X7P
  2 0 2-subslot Services SPA Carrier-400 7600-SSC-400
JAE13030LRQ
  5 2 Supervisor Engine 720 (Active) WS-SUP720-3B
SAL1232ZQ4H

Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
  1 0006.d65f.f500 to 0006.d65f.f52f 7.0 7.2(1) 12.2(33)SXI3 Ok
  2 0023.04e3.1fc8 to 0023.04e3.2007 2.0 12.2(33)SXI3 12.2(33)SXI3 Ok
  5 001c.5869.b9cc to 001c.5869.b9cf 5.7 8.5(2) 12.2(33)SXI3 Ok

Mod Sub-Module Model Serial Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
  1 IEEE Voice Daughter Card WS-F6K-GE48-AF SAL1107HA8G 1.4 Ok
 2/0 2 Gbps IPSec SPA SPA-IPSEC-2G JAB103604U5 1.0 Ok
  5 Policy Feature Card 3 WS-F6K-PFC3B SAL1232ZJ2B 2.4 Ok
  5 MSFC3 Daughterboard WS-SUP720 SAL1232ZSF6 3.2 Ok

Mod Online Diag Status
---- -------------------
  1 Pass
  2 Pass
 2/0 Pass
  5 Pass

--
http://dcp.dcptech.com
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Jeferson Guardia
> Sent: Tuesday, June 22, 2010 10:40 AM
> To: groupstudy
> Subject: 7606 or 7609 'show module' output
> 
>  GS,
> 
> Quick help, I am working on something right now and I need the output
> of the
> command "show module" from a 7606 or 7609.
> 
> Could anyone help me?
> 
> thanks,
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net