Hi Pavan
Any cisco link talking about this as I need some supported document to
discuss with my customer.
Thanks
David
-----Original Message-----
From: Pavan [mailto:pav.ccie_at_gmail.com]
Sent: Thursday, July 01, 2010 8:17 AM
To: Jason Aarons (US)
Cc: davidytk; ccielab_at_groupstudy.com; cisco-voip_at_puck.nether.net
Subject: Re: [cisco-voip] IPIPGW Question
Cube by default supports h450 only and ecs support by default is turned off.
Cube never initiates tcs on its call leg with ccm by design (as its the
middle man) and only responds to tcs. If ccm waits for far end tcs, then
media connect will timeout.
Sent from my phone
On Jun 30, 2010, at 15:41, "Jason Aarons (US)" <jason.aarons_at_us.didata.com>
wrote:
> I think it might be because it support ECS - Empty Capabilities Set, just
a guess, which means without ECS a MTP resource has to be available. Check
you CCM trace files for MTP when it's not working.
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
davidytk
> Sent: Wednesday, June 30, 2010 2:40 PM
> To: ccielab_at_groupstudy.com; cisco-voip_at_puck.nether.net
> Subject: IPIPGW Question
>
> Hi All
>
>
>
> I tried to configure IPIPGW (CUBE) for my testing. When phone A (Zone
Local
> A) dial phone B (Zone Remote B), I hear ringback on phone A when phone B
pick up the call. After checking, I need to uncheck the box " Wait for Far
End H.245 Terminal Capability" under trunk configuration in CUCM.
>
>
>
> I would like to know why I need to uncheck this box for IPIPGW (CUBE).
Does IPIPGW does not suppot H.245? Can anyone provide some link for this
issue.
>
>
>
> Thanks
>
> Best Regards
>
> David
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful. If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip_at_puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 01 2010 - 13:25:52 ART
This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 19:19:15 ART