Re: GNS3 Issues during PfR Lab

Stephen,

New finding - when I tried to get file via http sourced from R5 to switch 2
(connected via breakout switch) bypassing FR switch and serial link, it runs
like a charm. I am leaning towards issue with GNS3 FR switch as it might not
be able to handle such a huge load.

I will try your option and see how I go-

Thanks,

Bilal

On Wed, Aug 25, 2010 at 9:37 PM, Stephen Amaki <swamaki_at_gmail.com> wrote:

> Hi Bilal,
>
> Is it possible to your whole topology in dynamips including "switching".
> That way way you eliminate any doubts as to problems with dynamips
> communicating with your switches.
>
> OR you could also use the method i showed you for creating an exception
> dump, but do that on a router in the topology that you have reachability
> to. If you can effectively transfer files between these two, then start
> looking at problems with switch communication with dynamips.
>
> I assume this is the first time you are trying some type of file transfer
> between devices, yes?
>
> I run a complete dynamips only topology with dynagen ( I always thought it
> was more stable and lighter), and i dont have problems with generating
> traffic.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 25 2010 - 21:49:25 ART