Re: Catalyst 3750 - show policy-map interface command

Configure this on the interface:
Switch(config-if)#mls qos monitor packets
Switch(config-if)#mls qos monitor dscp 46 38 33 10 (Choose the DSCP values
you wish to monitor)

"show mls qos int statistics" to view the stats.

-- 
Paul Negron
CCIE# 14856 CCSI# 22752
Senior Technical Instructor
www.micronicstraining.com
> From: "Grammer, Christopher" <cgrammer_at_essilorusa.com>
> Reply-To: "Grammer, Christopher" <cgrammer_at_essilorusa.com>
> Date: Mon, 30 Aug 2010 23:02:59 -0500
> To: emir d souza <emir979_at_gmail.com>
> Cc: Cisco certification <ccielab_at_groupstudy.com>
> Subject: Re: Catalyst 3750 - show policy-map interface command
> 
> The command is not support on the 3560/3750
> I will show the policy map name and match clause and thats it i believe
> 
> 
> Chris
> 
> 
> On Mon, Aug 30, 2010 at 10:37 PM, emir d souza <emir979_at_gmail.com> wrote:
> 
>> Hi,
>> 
>> I'm not seeing any output (0 packets 0 bytes) using this command, despite
>> having marked the traffic.
>> 
>> How do I verify that my traffic is actually being marked and queued
>> correctly?
>> 
>> regards,
>> 
>> emir
>> 
>> 
>> Blogs and organic groups at http://www.ccie.net
>> 
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net