Your config looks good... I would try typing the passwords again, maybe you fat fingered it!
What does your "debug ntp authentication" tell you?
On Sep 3, 2010, at 9:00 AM, Combatant 101 wrote:
> Hi Guys,
> 
> 
> 
> If I set up NTP between R1 and R2 it works fine (verified by show ntp
> status)
> 
> 
> 
> R1 is NTP MASTER 2
> 
> R2 is NTP SERVER R1
> 
> 
> 
> However, when I then introduce authentication, it no longer works!!!! Even
> after a reload!!  ANY IDEAS???
> 
> 
> 
> Note: Key is identical at both ends!
> 
> 
> 
> R1
> 
> ntp authentication-key 1 md5 143442061C113E39702C62 7
> 
> ntp master 2
> 
> 
> 
> R2
> 
> ntp authentication-key 1 md5 0528560231595A1B4D0146 7
> 
> ntp authenticate
> 
> ntp trusted-key 1
> 
> ntp server 10.0.9.1 key 1
> 
> 
> 
> show ntp status
> 
> Clock is unsynchronized, stratum 16, no reference clock
> 
> nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**18
> 
> reference time is D02B7567.BC07AC6A (13:23:51.734 UTC Fri Sep 3 2010)
> 
> clock offset is -107.2163 msec, root delay is 76.55 msec
> 
> root dispersion is 109.88 msec, peer dispersion is 2.40 msec
> 
> 
> 
> DEBUG on R2
> 
> 
> 
> .Sep  3 13:55:00.604: NTP: xmit packet to 10.0.9.1:
> 
> .Sep  3 13:55:00.604:  leap 3, mode 3, version 3, stratum 0, ppoll 64
> 
> .Sep  3 13:55:00.604:  rtdel 1399 (76.553), rtdsp 1C22 (109.894), refid
> 0A000901
> 
> (10.0.9.1)
> 
> .Sep  3 13:55:00.604:  ref D02B7567.BC07AC6A (13:23:51.734 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.604:  org D02B7C74.0D4E85E9 (13:53:56.051 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.604:  rec D02B7C74.AED654A1 (13:53:56.682 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.604:  xmt D02B7CB4.9AD24C22 (13:55:00.604 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.604:  Authentication key 1
> 
> .Sep  3 13:55:00.684: NTP: rcv packet from 10.0.9.1 to 10.0.5.1 on Vlan1:
> 
> .Sep  3 13:55:00.684:  leap 0, mode 4, version 3, stratum 2, ppoll 64
> 
> .Sep  3 13:55:00.684:  rtdel 0000 (0.000), rtdsp 0019 (0.381), refid
> 7F7F0101 (1
> 
> 27.127.1.1)
> 
> .Sep  3 13:55:00.684:  ref D02B7CAB.EEB6365A (13:54:51.932 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.684:  org D02B7CB4.9AD24C22 (13:55:00.604 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.684:  rec D02B7CB4.0889592E (13:55:00.033 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.684:  xmt D02B7CB4.08AC6A53 (13:55:00.033 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.684:  inp D02B7CB4.AF3DD50F (13:55:00.684 UTC Fri Sep 3
> 2010)
> 
> .Sep  3 13:55:00.684:  Authentication key 0
> 
> 
> 
> 
> 
> DEBUG on R1
> 
> 
> 
> Sep  3 13:53:56.049: NTP message received from 10.0.5.1 on interface 'Vlan1'
> (10
> 
> .0.9.1).
> 
> Sep  3 13:53:56.049: NTP Core(DEBUG): ntp_receive: message received
> 
> Sep  3 13:53:56.049: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next
> acti
> 
> on is 3.
> 
> Sep  3 13:53:56.049: NTP Core(DEBUG): ntp_receive: doing fast answer to
> client.
> 
> Sep  3 13:53:56.049: NTP message sent to 10.0.5.1, from interface 'Vlan1'
> (10.0.
> 
> 9.1).
> 
> carrylift_computrad#
> 
> carrylift_computrad#
> 
> Sep  3 13:55:00.029: NTP message received from 10.0.5.1 on interface 'Vlan1'
> (10
> 
> .0.9.1).
> 
> Sep  3 13:55:00.033: NTP Core(DEBUG): ntp_receive: message received
> 
> Sep  3 13:55:00.033: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next
> acti
> 
> on is 3.
> 
> Sep  3 13:55:00.033: NTP Core(DEBUG): ntp_receive: doing fast answer to
> client.
> 
> Sep  3 13:55:00.033: NTP message sent to 10.0.5.1, from interface 'Vlan1'
> (10.0.
> 
> 9.1).
> 
> 
> 
> Thanks
> 
> 
> 
> Sunny
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Fri Sep 03 2010 - 10:49:55 ART
This archive was generated by hypermail 2.2.0 : Fri Oct 01 2010 - 05:58:05 ART