I can't get to my Ubuntu setup today but I have a Debian setup at home 
and I will try it out this evening and get back with you.
Debian server
             |
             .1q
             |
  breakout 3750
              |
     4x 3560s
--Hammer--
On 9/7/2010 9:22 AM, Nathan Pease wrote:
> Thanks Hammer! Are you running ntp master and ospf on the same router? 
> I have tried this on my server and my laptop in both Windows and 
> Ubuntu. I just downloaded c7200-adventerprisek9-mz.150-1.M3.bin 
> thinking that going to 15.0 ios would help, but I get the same result 
> every time.
>
> The only thing they all have in common is that I run ntp master and 
> have ospf adjacencies. I have tried this on a very simple three router 
> ospf network. Those were the only two protocols running, but my 
> ospf adjacencies begin flapping as soon as I do ntp master on one of 
> my routers.
>
> On Tue, Sep 7, 2010 at 6:44 AM, --Hammer-- <bhmccie_at_gmail.com 
> <mailto:bhmccie_at_gmail.com>> wrote:
>
>      Running NTP labs on my Ubuntu install has no issues.
>
>     --Hammer--
>
>
>
>     On 9/6/2010 4:54 PM, Matthew George wrote:
>
>         I think this may be just a Windows issue.
>
>         -Matt George
>
>         -----Original Message-----
>         From: nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com>
>         [mailto:nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com>]
>         On Behalf Of
>         garry baker
>         Sent: Monday, September 06, 2010 5:25 PM
>         To: Nadeem Rafi
>         Cc: Cisco certification
>         Subject: Re: GNS3 ntp master crashing my PC
>
>         running 3725 12.4(15)T12 on Ubuntu and do not see any issues
>         with this with
>         GNS3 0.6.1 and dynamips 0.2.8-RC2...
>
>         thanks..
>         garry..
>
>         --
>         Garry L. Baker
>
>         "There is no 'patch' for stupidity." - www.sqlsecurity.com
>         <http://www.sqlsecurity.com>
>
>
>         On Mon, Sep 6, 2010 at 11:58 AM, Nadeem Rafi<nrafia_at_gmail.com
>         <mailto:nrafia_at_gmail.com>>  wrote:
>
>             never seen such issue on my GNS3/Dynamips.........
>
>             On Mon, Sep 6, 2010 at 8:00 PM, Matthew
>             George<mgeorge_at_geores.net <mailto:mgeorge_at_geores.net>>  wrote:
>
>                 When writing the NTP labs for my website I noticed the
>                 same issue.
>
>             Anytime
>
>                 I
>                 attempted to configure an NTP master on dynamips the
>                 processor
>
>             utilization
>
>                 maxes out and the router freezes up.
>
>                 When trying to change the idle pc value the only one
>                 available was
>
>             0x000000
>
>                 [1000]
>
>                 The only way around this seems to be to use real
>                 hardware or skip
>                 the NTP labs.
>
>                 -Matt George
>
>                 -----Original Message-----
>                 From: nobody_at_groupstudy.com
>                 <mailto:nobody_at_groupstudy.com>
>                 [mailto:nobody_at_groupstudy.com
>                 <mailto:nobody_at_groupstudy.com>] On Behalf
>                 Of Radioactive Frog
>                 Sent: Monday, September 06, 2010 7:51 AM
>                 To: Nathan Pease
>                 Cc: ccielab_at_groupstudy.com <mailto:ccielab_at_groupstudy.com>
>                 Subject: Re: GNS3 ntp master crashing my PC
>
>                 Does your PC CPU utilization goes high when you turn
>                 NTP master on?
>
>
>                 On Mon, Sep 6, 2010 at 7:58 AM, Nathan Pease
>                 <pease.nathan_at_gmail.com <mailto:pease.nathan_at_gmail.com>>
>                 wrote:
>
>                     Does anyone have issues when using GNS3 to do ntp
>                     labs? As soon as
>                     I put ntp master on a router in GNS3, it starts
>                     freezing up and
>                     loosing adjacencies.
>                     I
>                     have tried this on windows and Ubuntu as well as
>                     several different
>                     IOS versions and routers in GNS3. Has anyone had
>                     this same experience?
>
>
>                     Blogs and organic groups at http://www.ccie.net
>
>                     __________________________________________________________________
>                     ____ _ Subscription information may be found at:
>                     http://www.groupstudy.com/list/CCIELab.html
>
>
>                 Blogs and organic groups at http://www.ccie.net
>
>                 ____________________________________________________________________
>                 ___ Subscription information may be found at:
>                 http://www.groupstudy.com/list/CCIELab.html
>
>
>                 Blogs and organic groups at http://www.ccie.net
>
>                 ____________________________________________________________________
>                 ___ Subscription information may be found at:
>                 http://www.groupstudy.com/list/CCIELab.html
>
>
>             Blogs and organic groups at http://www.ccie.net
>
>             ______________________________________________________________________
>             _ Subscription information may be found at:
>             http://www.groupstudy.com/list/CCIELab.html
>
>
>         Blogs and organic groups at http://www.ccie.net
>
>         _______________________________________________________________________
>         Subscription information may be found at:
>         http://www.groupstudy.com/list/CCIELab.html
>
>
>         Blogs and organic groups at http://www.ccie.net
>
>         _______________________________________________________________________
>         Subscription information may be found at:
>         http://www.groupstudy.com/list/CCIELab.html
>
>
>
>     Blogs and organic groups at http://www.ccie.net
>
>     _______________________________________________________________________
>     Subscription information may be found at:
>     http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Tue Sep 07 2010 - 09:28:12 ART
This archive was generated by hypermail 2.2.0 : Fri Oct 01 2010 - 05:58:05 ART