Hi Jeferson,
If you type "show ip int bri | exclude unassigned" it would show only
interfaces that have IP addresses but  you would still see stuff like
"Loopback0                  1.1.1.1         YES manual up" for each line
If you paste the output into notepad, you can hit control h and replace "YES
manual up" with nothing which would remove that part and just manually
remove the interface designations.
Cheers,
Adam
On Fri, Oct 8, 2010 at 1:39 PM, Jeferson Guardia <jefersonf_at_gmail.com>wrote:
> Guys, anyone have any idea how can I only see the IPs when I have something
> like this?
>
> R1#sh ip int br | sec IP-Address
> Interface                  IP-Address      OK? Method Status
> Protocol
> R1#sh ip int br
> Interface                  IP-Address      OK? Method Status
> Protocol
> FastEthernet0/0            10.1.12.1       YES manual up
> up
> Serial0/0                  unassigned      YES NVRAM  administratively down
> down
> FastEthernet0/1            unassigned      YES NVRAM  administratively down
> down
> Serial0/1                  unassigned      YES NVRAM  administratively down
> down
> Loopback0                  1.1.1.1         YES manual up
> up
> Loopback1                  2.2.2.2         YES manual up
> up
> Loopback3                  125.1.1.1       YES manual up
> up
> Loopback4                  128.1.1.1       YES manual up
> up
> Loopback5                  131.1.1.1       YES manual up
> up
> Loopback6                  191.1.1.1       YES manual up
> up
> Loopback7                  192.1.1.1       YES manual up
> up
> Loopback8                  195.1.1.1       YES manual up
> up
> Loopback9                  200.1.1.1       YES manual up
> up
> Loopback10                 223.1.1.1       YES manual up
> up
> Loopback11                 4.4.4.4         YES manual up
> up
> Loopback12                 5.5.5.5         YES manual up
> up
> Loopback13                 6.6.6.6         YES manual up
> up
> Loopback14                 132.1.1.1       YES manual up
> up
> Loopback15                 133.1.1.1       YES manual up
> up
> Loopback16                 193.1.1.1       YES manual up
> up
> Loopback17                 194.1.1.1       YES manual up
> up
> R1#
>
>
> The idea is having an output with just the IP's, thus I can copy and paste
> it quickly into a tcl script to verify connectivity when redistributing or
> something.
>
> Rgs,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Fri Oct 08 2010 - 13:44:43 ART
This archive was generated by hypermail 2.2.0 : Mon Nov 01 2010 - 06:42:05 ART