RE: Not enough space,

I resolved that way:
Stop Every Device in GNS3
Right click on the router and then click Configure then Memories and Disks
then increase the RAM size to 256 M and increase the PCMSI Disk0 to 256M.

(If you do NATing you will face the same issue.....)

Best Regards,

==============================
Mahmoud Nossair
Senior Network Engineer.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Manouchehr Omari
Sent: Saturday, October 16, 2010 11:02 PM
To: Cisco certification
Subject: Not enough space,

Hello All,

Anyone has any idea how to overcome the following issue under the GNS. I
have 6-Routers, 3-BB, 4-Switches and 3 process running.

SW3#vlan database
SW#(vlan)# vlan 100
% not enough space on flash to store vlan database. trying squeeze...
squeeze of flash complete
% not enough space on flash to store vlan database even after squeeze
Error on database apply 40: NV storage failure
Use 'abort' command to exit

---------------------------

[localhost:7201]
    workingdir = working
    udp = 15000
    [[3725]]
        image =
/home/manouchehr/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-25a.BIN
        ram = 192
        idlepc = 0x60a837c8
        ghostios = True

Best Regards,

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 17 2010 - 08:32:54 ART