Re: OT: HWIC-3G-GSM Module Configration Problem...need help

Hi Muhammad,

I can't see a logical interface created for cell interface where you define
your PPP username/password and also the authentication method.

An example from my config as below:

interface Dialer1
 ip address negotiated
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer idle-timeout 0
 dialer string gsm
 dialer persistent
 dialer-group 1
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname XXX
 ppp chap password YYY

Regards,

Bilal

On Sat, Oct 30, 2010 at 11:05 PM, muhammad adnan <taurusadnan19_at_gmail.com>wrote:

> Dear Group members:-
> i am trying to configure the 3G-module.i
> have inserted my sim card into the HWIC module sim card properly working
> in
> the phone and i am accessing the internet.
> but when i configure HWIC module accordingly i am unable to access the
> internet my configration pasted below if any experience person guid me
> little.
>
>
> in my phone i just put APN and it work fine without Authentication *Service
> provider ask me* that the *username and password is blank..*
>
> country Libya
> GSM service provider =Almadar
> APN or access point name =almadar.net
>
>
>
>
> *Router#show cellular 0/1/0 profile
> Profile 1 = INACTIVE*
> --------
> PDP Type = IPv4
> Access Point Name (APN) = almadar.net
> Authentication = None
> Username: , Password:
>
> * - Default profile
> *
>
> --------------------------------------------------------------------------------------
> *Router config*:
> *
> !
> !
> !
> multilink bundle-name authenticated
> !
> chat-script gsm "" "ATDT*99*1#" TIMEOUT 60 "CONNECT"
> !
> !
> !
> !
> interface Loopback0
> ip address 10.0.0.1 255.255.255.0
> !
> interface Wlan-GigabitEthernet0/0
> description Internal switch interface connecting to the embedded AP
> !
> interface GigabitEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface wlan-ap0
> description Service module interface to manage the embedded AP
> no ip address
> arp timeout 0
> no mop enabled
> no mop sysid
> !
> interface GigabitEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface ATM0/0/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> !
> interface Cellular0/1/0
> ip address negotiated
> encapsulation ppp
> dialer in-band
> dialer idle-timeout 30
> dialer string gsm
> dialer-group 1
> async mode interactive
> ppp ipcp dns request
> !
> interface Vlan1
> no ip address
> !
> ip forward-protocol nd
> !
> no ip http server
> no ip http secure-server
> !
> ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
> !
> access-list 1 permit any
> dialer-list 1 protocol ip list 1
> !
> !
> !
> control-plane
> !
> !
> line con 0
> line aux 0
> line 0/1/0
> exec-timeout 0 0
> script dialer gsm
> login
> modem InOut
> no exec
> speed 80000
> line 67
> no activation-character
> no exec
> transport preferred none
> transport input all
> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
> line vty 0 4
> login
> !
> scheduler allocate 20000 1000
> end*
>
>
>
>
>
>
>
>
> kindly Guid me
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Oct 30 2010 - 23:28:51 ART