RE: How to stack 2 3750 switches?

show switch detail
                                               Current
Switch# Role Mac Address Priority State
--------------------------------------------------------
*1 Master 0014.f2bc.6b00 15 Ready
 2 Member 0019.e888.2600 10 Ready
 5 Member 0016.4773.3780 1 Ready

I added switch 5 to the stack. But, when I looked at the "show switch detail"
command I see that switch 1 and 2 have priority configured on it.

But, in the config I have not configured any "switch 1 priority 15" and
"switch 2 priority 10" commands on the switch.

Where is the switch picking the priority from?

From: steven.blasiol_at_gmail.com
Date: Tue, 2 Nov 2010 15:03:42 -0400
Subject: Re: How to stack 2 3750 switches?
To: bmahaffey_at_pelco.com
CC: ebay_products_at_hotmail.com; ccielab_at_groupstudy.com

One of them will be the stackmaster and it will show you on the front which
one is. You can configure which order they are in, but this is not strictly
necessary.

On Tue, Nov 2, 2010 at 2:52 PM, Mahaffey, Brian <bmahaffey_at_pelco.com> wrote:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/relea

se/12.2_25_see/configuration/guide/swstack.html

This will explain step by step and the logic regarding the stack.

-----Original Message-----

From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of

Cisco Fanatic

Sent: Tuesday, November 02, 2010 11:09 AM

To: ccielab_at_groupstudy.com

Subject: How to stack 2 3750 switches?

I have seen lot of documentations as how to stack 2 3750s switches. I

am

looking for a step-by-step instructions on how to stack 2 3750 switches.

Really,

 appreciate if someone who has done it before and have hands-on

experience (in lab or production environment) can direct me. Thanks,Yuri

Blogs and organic groups at http://www.ccie.net
Received on Sat Nov 20 2010 - 15:37:20 ART