QOS in Cisco 7609

Hi

  I saw the following in cisco 7609, I am Just wondering how it works , as the
interfaces is IP interface, however the qos is for COS (layer2).
  Do your guys have any idea? or do you think the layer 2 QOS is working for
this layer 3 IP interface ?

Current configuration : 945 bytes
!
interface GigabitEthernet5/1
 mtu 1534
 ip address 10.104.234.2 255.255.255.252
 ip mtu 1500
 ip flow ingress
 ip ospf message-digest-key 1 md5 7 020B555505575C2C1C5B1A4A
 ip ospf bfd
 wrr-queue bandwidth percent 65 35
 wrr-queue queue-limit 40 30
 wrr-queue random-detect min-threshold 1 40 80
 wrr-queue random-detect min-threshold 2 70 80
 wrr-queue random-detect max-threshold 1 80 100
 wrr-queue random-detect max-threshold 2 80 100
 wrr-queue cos-map 1 1 1
 wrr-queue cos-map 1 2 0 4
 wrr-queue cos-map 2 1 2 3
 wrr-queue cos-map 2 2 6 7
 mpls traffic-eng tunnels
 mpls traffic-eng backup-path Tunnel9003
 mpls accounting experimental input
 mpls accounting experimental output
 mpls ip
 bfd interval 200 min_rx 200 multiplier 3
 service-policy input CORE_to_PE_Police_RT
 service-policy output PE_to_CORE_Police_RT
 ip rsvp bandwidth 1000000
 ip rsvp signalling hello

Thanks,
Terry

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 29 2010 - 11:04:08 ART