Re: switchport config under interace or port-channel?

interface range f0/19 - 20
switchport trunk encapsulation {dot1q|isl}
switchport mode trunk
channel-group 1 mode on

Po will inherit switchport configs from physical ports. For L3, it is
other way around.

> http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/configuration/guide/swethchl.html#wp1275918

On 02/05/2011 01:28 AM, Hussam EL Kebbi wrote:
> Hi Experts,
> Is there a difference to apply configuration of switchport (mode trunk, encap,
> nonegotiate) under interface or under port channel?
>
> int range fa0/19-20switchport mode trunkswithport trunk...channel-group 1
>
> or int range fa0/19-20
> channel-group 1
> then int port-channel 1switchport mode trunkswithport trunk..
> Thanks,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
/Lefe Meedorf/
Blogs and organic groups at http://www.ccie.net