RE: MPLS Question

If you have a hub and spoke topology and are running MPLS you must use
multipoint network type. Please expand on your configuration.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Maarten Vervoorn
Sent: Tuesday, February 22, 2011 8:12 AM
To: Vincent Tay
Cc: Ccielab_at_groupstudy.com
Subject: Re: MPLS Question

MPLS LDP is supportig that. I think there was an issue in you OSPF
configuration, Could you reconfigure the network with point-to-multipoin and
post your configurations. Check if your OSPF neighbors are up check if your
ldp router-id's are propagated

Kind regards,

Maarten Vervoorn

2011/2/22 Vincent Tay <vtay.75_at_gmail.com>

> Hi all,
>
> Can anyone point me to Cisco resources or explain why and is it true that
> ip
> ospf network point-to-multipoint does not support MPLS LDP. I have try
> to lab it and MPLS does not tag until it was change to ip ospf network
> broadcast in the frame relay cloud. Thanks.
>
> Regards
> Vincent Tay
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 22 2011 - 08:30:59 ART