Re: How to advertise ethernet IP as /32 in BGP

Hi Nadeem,

Thanks for the quick reply. It is not possible. Also I want to keep
tha mask as /24 on Ethernet & find a way to advertise it also as /32
for NAT/PAT purpose.

Any more ideas???

R2#int FastEthernet0/0
R2(config-if)#
R2(config-if)#ip address 1.1.1.1 255.255.255.255
Bad mask /32 for address 1.1.1.1
R2(config-if)#

Mathew

On Tue, Mar 29, 2011 at 6:19 PM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
> simple way is to change ip address on ethernet from x.x.x.x 255.255.255.0 to
> 255.255.255.255 and then advertise this address in BGP.
> HTH
>
> On Tue, Mar 29, 2011 at 10:15 AM, Mathew <mathewfer_at_gmail.com> wrote:
>>
>> Hi All,
>>
>> Is there a way to advertise Ethernet IP as /32 route in BGP?
>>
>> I have a requirement to advertise Ethernet IP as /32 (host route) in
>> BGP so other routers will see it as a host route.
>>
>> In fact, I tried many way (static to null, loopback - not possible
>> etc) without a success & I believe there is a simple way to do that.
>>
>> Any suggestions/workaround is appreciated.
>>
>> R2#sho runn int fast 0/0
>> Building configuration...
>>
>> Current configuration : 530 bytes
>> !
>> interface FastEthernet0/0
>> ip address 10.100.40.2 255.255.255.0
>> !
>> .
>> .
>>
>> --
>> Thanks
>>
>> Mathew
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>

-- 
Thanks
Mathew
Blogs and organic groups at http://www.ccie.net