Thanks to everyone for there responses.
Joe - My switch is not accepting "show mls qos interface statistics", is
there any another other way to get the output similar to "show policy-map
interface gig" command.
*Output of show mls qos options:-
*abcd05-usrs02#sh mls qos ?
  aggregate-policer  aggregate-policer keyword
  agid               show aggregate ID database
  arp                arp keyword
  counter            show event counters
  detailed           detailed output
  flid               shows flow ID database
  hw-policymap       show policymap used by QM process
  ip                 ip keyword
  ipv6               ipv6 keyword
  label              show label
  last               last keyword
  mac                mac keyword
  maps               maps keyword
  module             show entries in module
  protocol           protocol passthrough information
  statistics-export  QOS Statistics export
  subblock           shows qm subblock
  |                  Output modifiers
  <cr>
*Below is the output of counter error:-*
 GigabitEthernet8/24
  Service-policy input: ABC-MARKING-POLICY
    class-map: ABC-MARKING-VOICE (match-all)
      Match: access-group name ABC-MARKING-VOICE
      police :
        400000 bps 8000 limit 8000 extended limit
      counters not available (install failure)
*looking for similar outputs of policy-map*
 GigabitEthernet1/1
  Service-policy input: ABC-MARKING-POLICY
    class-map: ABC-MARKING-VOICE (match-all)
      Match: access-group name ABC-MARKING-VOICE
      police :
        400000 bps 8000 limit 8000 extended limit
      Earl in slot 5 :
        0 bytes
        5 minute offered rate 0 bps
        aggregate-forwarded 0 bytes action: set-dscp-transmit
        exceeded 0 bytes action: drop
        aggregate-forward 0 bps exceed 0 bps
*Switch details:-*
WS-C6509-E
WS-SUP32-GE-3B
Version 12.2(33)SXI4a
Regards,
On Thu, Jun 9, 2011 at 8:30 PM, Joe Astorino <joeastorino1982_at_gmail.com>wrote:
> Yes, I ran into similar problems recently on a cat 3750 with inbound
> policy-maps.  Antonio is right check out the output of "show mls qos
> interface statistics".  You won't get ACL matches but you can  at least
> verify some things.  Here is an example from a production 3750
>
> GigabitEthernet1/0/1
>
>   dscp: incoming
> -------------------------------
>
>   0 -  4 :  2666767930      3903432     75566323        69333     61137142
>   5 -  9 :       70220     36417232       352455   3480555754       277948
>  10 - 14 :     5017145          251      2497780      1614521       133909
>  15 - 19 :       43274     36518753           56      6510143         3547
>  20 - 24 :      212262           32     13936597          358     27246770
>  25 - 29 :        3081      2135600           33       406336           33
>  30 - 34 :      137512          144       505358          166      4918274
>  35 - 39 :         287      9118914           57         5482           28
>  40 - 44 :    10042737     10507698        33762           26      1449308
>  45 - 49 :          26     43344853          648    100765440           78
>  50 - 54 :         691           69          316          265          263
>  55 - 59 :          58        36708         3432        91403           23
>  60 - 64 :         289           31          123       955028
>   dscp: outgoing
> -------------------------------
>
>   0 -  4 :  1992869485        27688     19401385        12774      1190343
>   5 -  9 :         659        17077        16509      3874225          194
>  10 - 14 :      131781            0        31873         7844           18
>  15 - 19 :          15       316066            0       613184         3268
>  20 - 24 :        5706            0           18           22        35614
>  25 - 29 :           8        47839            0            1            0
>  30 - 34 :           4            0        53840            0        23161
>  35 - 39 :           0        38370            0           21            0
>  40 - 44 :      165888         4010        10581            0        26356
>  45 - 49 :           0        36962          298      6457462            0
>  50 - 54 :           0            0            0            0            0
>  55 - 59 :           0           23            0            0            0
>  60 - 64 :           2            0            0           15
>   cos: incoming
> -------------------------------
>
>   0 -  4 :  2329546480            0            0            0            0
>   5 -  7 :           0            0            0
>   cos: outgoing
> -------------------------------
>
>   0 -  4 :  2026883906            0            0            0            0
>   5 -  7 :           0            0            0
>   output queues enqueued:
> queue: threshold1 threshold2 threshold3
> -----------------------------------------
>  queue 0:           2           0           0
>  queue 1:  2531333165       13302    22521970
>  queue 2:           0           0           0
>  queue 3:           0           0  3823671781
>
>   output queues dropped:
> queue: threshold1 threshold2 threshold3
> -----------------------------------------
>  queue 0:            0            0            0
>  queue 1:      5390526            0            0
>  queue 2:            0            0            0
>  queue 3:            0            0        71854
>
> Policer: Inprofile:            0 OutofProfile:            0
>
>
>
> On Thu, Jun 9, 2011 at 10:42 AM, Antonio Soares <amsoares_at_netcabo.pt>wrote:
>
>> You should try the "show mls qos" options.
>>
>>
>> Regards,
>>
>> Antonio Soares, CCIE #18473 (R&S/SP)
>> amsoares_at_netcabo.pt
>> http://www.ccie18473.net
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Marko Milivojevic
>> Sent: quinta-feira, 9 de Junho de 2011 06:54
>> To: want2bccie .
>> Cc: Cisco certification
>> Subject: Re: counters not available on policy-map
>>
>> Policy-map counters applied on switches usually don't work.
>>
>> --
>> Marko Milivojevic - CCIE #18427
>> Senior Technical Instructor - IPexpert
>>
>> FREE CCIE training: http://bit.ly/vLecture
>>
>> Mailto: markom_at_ipexpert.com
>> Telephone: +1.810.326.1444
>> Web: http://www.ipexpert.com/
>>
>> On Wed, Jun 8, 2011 at 01:26, want2bccie . <want2bccie_at_gmail.com> wrote:
>> > Hi GS,
>> >
>> > I am getting "counters not available (install failure)" on show
>> policy-map
>> > interface Gigx/x
>> >
>> > GigabitEthernet8/24
>> >
>> > B Service-policy input: ABC-MARKING-POLICY
>> >
>> > B  class-map: ABC-MARKING-VOICE (match-all)
>> > B  B  Match: access-group name ABC-MARKING-VOICE
>> > B  B  police :
>> > B  B  B  400000 bps 8000 limit 8000 extended limit
>> > B  B  *counters not available (install failure)*
>> >
>> >
>> > Can anyone please tell me what could be the issue, will this be
>> effecting my
>> > existing traffic, is policy properly getting applied.
>> >
>> > Thanks.
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Regards,
>
> Joe Astorino
> CCIE #24347
> Blog: http://astorinonetworks.com
>
> "He not busy being born is busy dying" - Dylan
Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 12 2011 - 10:51:31 ART
This archive was generated by hypermail 2.2.0 : Fri Jul 01 2011 - 06:24:28 ART