Re: 2511 ACCESS SERVER

thanks for reply....

My line numbers are 1 to 16 and i think its ok

Cisco2511#sh line
   Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 0 CTY - - - - - 0 1 0/0
-
     1 TTY 9600/9600 - - - - - 0 0 0/0
-
     2 TTY 9600/9600 - - - - - 0 0 0/0
-
     3 TTY 9600/9600 - - - - - 0 0 0/0
-
     4 TTY 9600/9600 - - - - - 0 0 0/0
-
     5 TTY 9600/9600 - - - - - 0 0 0/0
-
     6 TTY 9600/9600 - - - - - 0 0 0/0
-
     7 TTY 9600/9600 - - - - - 0 0 0/0
-
     8 TTY 9600/9600 - - - - - 0 0 0/0
-
     9 TTY 9600/9600 - - - - - 0 0 0/0
-
    10 TTY 9600/9600 - - - - - 0 0 0/0
-
    11 TTY 9600/9600 - - - - - 0 0 0/0
-
    12 TTY 9600/9600 - - - - - 0 0 0/0
-
    13 TTY 9600/9600 - - - - - 0 0 0/0
-
    14 TTY 9600/9600 - - - - - 0 0 0/0
-
    15 TTY 9600/9600 - - - - - 0 0 0/0
-
    16 TTY 9600/9600 - - - - - 0 0 0/0
-
    17 AUX 9600/9600 - - - - - 0 0 0/0
-
    18 VTY - - - - - 0 0 0/0
-
    19 VTY - - - - - 0 0 0/0
-
    20 VTY - - - - - 0 0 0/0
-

and i am trying telnet r1 and straight away r1 also but it shows the
following and hang i restart my router and then it comes normal

Cisco2511#telnet r1
Trying R1 (1.1.1.1, 2002)... Open

i dont know why it hang.... pls tell me whats wrong m i doing...?

thanks
Achal
On Thu, Jun 16, 2011 at 8:06 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar>wrote:

> ACHAL,
> your config is ok as long as your lines are numbered 1 to 16,
> which in the case of a 2511 they should. Do a show line to verify.
>
> What exactly is your problem ? Can you telnet to the reverse telnet port
> and get connected ? Or refused ?
> Connected and nothing ?
>
> -Carlos
>
>
> ACHAL GUPTA @ 15/06/2011 20:08 -0300 dixit:
>
> Hello Experts,
>>
>> Can anyone tell me how can i make my 2511 roter as a access server?
>>
>> i tried with following config but not working.
>>
>> I gave the ip address to ethernet (172.16.1.2) and its pinging my Laptop
>> ip
>> address.
>>
>> i attach my octal cable also with no.1 cable in R1 and no.2 cable in
>> R2.........
>>
>> ip host R1 2001 172.16.1.2
>> ip host R2 2002 172.16.1.2
>> - - - - - -
>> - - - - - -
>>
>> line con 0
>> line 1 16
>> exec-timeout 0 0
>> no exec
>> transport input all
>> line vty 0 4
>> password cisco
>> login
>>
>>
>> i did that config but it is not working
>>
>> pls tell me ehat i m doing wrong and what else i will have to do?
>>
>>
> --
> Carlos G Mendioroz <tron_at_huapi.ba.ar> LW7 EQI Argentina
>

-- 
*
Thanks,*
*Achal*
Blogs and organic groups at http://www.ccie.net