Can you give us a show ip ospf on both routers.
Check the router-ID's
Kind regards,
Maarten Vervoorn
CCIE#27144
2011/7/7 Nayyar HH <nyrhh_at_hotmail.co.uk>
> Hi Guys!
>
>
>
> I'm hoping someone might be able to help me in reasoning this through J
>
>
>
>
>
> Partial Topology
>
>
>
> R3:s1/3 <---- Area 5 ----- >s0/1:R2
>
>
>
>
>
> Partial Config
>
>
>
> R3
>
> Int s1/3
>
> Ip ospf cost 65535
>
> !
>
> Int lo0
>
> Ip address 150.12.3.3 255.255.255.0
>
> !
>
> Router ospf 1
>
> Area 5 virtual-link 150.12.2.2
>
>
>
> R2
>
> Router ospf 1
>
> Area 5 virtual-link 150.12.3.3
>
> !
>
> Int s0/1
>
> Ip ospf cost 1
>
> !
>
> Int lo0
>
> Ip address 150.12.2.2 255.255.255.0
>
> !
>
>
>
> Outcome
>
>
>
> Rack12R2#sh ip osp int bri
>
> Interface    PID   Area            IP Address/Mask    Cost  State Nbrs F/C
>
> VL1          1     0               0.0.0.0/0          65535 DOWN  0/0
>
> Se0/0        1     0               155.12.0.2/24      19430 P2MP  1/1
>
> Lo0          1     5               150.12.2.2/24      1     P2P   0/0
>
> Se0/1        1     5               155.12.23.2/24     1     P2P   1/1
>
> Fa0/0        1     51              192.10.12.2/24     300   BDR   1/1
>
>
>
>
>
> Rack12R3#sh ip osp int brie
>
> Interface    PID   Area            IP Address/Mask    Cost  State Nbrs F/C
>
> VL2          1     0               155.12.23.3/24     65535 P2P   0/0
>
> Se1/0        1     0               155.12.0.3/24      65535 P2MP  1/1
>
> Fa0/0        1     2               155.12.37.3/24     300   BDR   1/1
>
> Se1/2        1     4               155.12.13.3/24     65535 P2P   1/1
>
> Lo0          1     5               150.12.3.3/24      1     P2P   0/0
>
> Se1/3        1     5               155.12.23.3/24     65535 P2P   1/1
>
>
>
>
>
> Rack12R3#r 150.12.2.0
>
> Routing entry for 150.12.2.0/24
>
>  Known via "ospf 1", distance 110, metric 65536, type intra area
>
>  Last update from 155.12.23.2 on Serial1/3, 00:08:40 ago
>
>  Routing Descriptor Blocks:
>
>  * 155.12.23.2, from 150.12.2.2, 00:08:40 ago, via Serial1/3
>
>      Route metric is 65536, traffic share count is 1
>
>
>
>
>
>
>
> When the interface cost on r3 is dropped the virtual-link comes up
>
> Why does the maximum metric affect the Virtual-Link from coming up but not
> "native" traffic (with maximum metric) being routed out the interface?
>
> Or could it be something else in my config causing this ?
>
>
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 07 2011 - 14:00:37 ART
This archive was generated by hypermail 2.2.0 : Mon Aug 01 2011 - 06:30:05 ART