RE: Hidden OSPF Command

Hi All,

I currently studying for my CCIE R&S and accidentally typed in the command
Show ip ospf route and got the output below:

Is Show ip ospf a hidden command?

R1#show ip ospf route

            OSPF Router with ID (1.1.3.1) (Process ID 1)

    Area 1

    Intra-area Route List
* 1.1.0.1/32, Intra, cost 1, area 1, Connected
      via 1.1.0.1, Loopback0
* 1.1.1.1/32, Intra, cost 1, area 1, Connected
      via 1.1.1.1, Loopback1
* 1.1.2.1/32, Intra, cost 1, area 1, Connected
      via 1.1.2.1, Loopback2
* 1.1.3.1/32, Intra, cost 1, area 1, Connected
      via 1.1.3.1, Loopback3
* 10.1.12.0/24, Intra, cost 64, area 1, Connected
      via 10.1.12.1, Serial0/0.12

    Intra-area Router Path List
i 2.2.2.2 [64] via 10.1.12.2, Serial0/0.12, ABR, Area 1, SPF 3

    Inter-area Route List
*> 2.2.2.2/32, Inter, cost 65, area 1
      via 10.1.12.2, Serial0/0.12
*> 10.1.23.0/24, Inter, cost 74, area 1
      via 10.1.12.2, Serial0/0.12
R1#

1# sh ver
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
12.4(11)XW7, RELEASE SOFTWARE (fc2)

Regards,

Theo

Blogs and organic groups at http://www.ccie.net
Received on Sat Sep 24 2011 - 21:28:04 ART