(no subject)

Configure :

tunnel mpls traffic-eng autoroute announce

under the tunnel interface.

thanks,
aamir

On Sun, Nov 27, 2011 at 1:50 PM, Daniel Hood <dsmhood_at_gmail.com> wrote:
> Trying to configure the network on page 266 of cisco press: mpls
> fundamentals. I've configured the network and got all the tunnels working.
> Except now I'm trying to force all the traffic to go through a new tunnel
> I've created from paris - brussels - frankfurt - berlin - rome. I'm trying
> to force traffic through it. Below is how I've setup paris, can someone
> please explain how I can now force traffic to go through my tunnel instead
> of the normal route?
>
> pais#
> !
> interface Loopback0
> ip address 10.200.254.2 255.255.255.255
> !
> interface Tunnel1
> bandwidth 100000
> ip unnumbered Loopback0
> tunnel destination 10.200.254.6
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng priority 7 7
> tunnel mpls traffic-eng bandwidth 100000
> tunnel mpls traffic-eng path-option 2 explicit name
> brussels-frankfurt-berlin
> tunnel mpls traffic-eng path-selection metric igp
> no routing dynamic
> !
> interface FastEthernet0/0
> description to london
> bandwidth 100000
> ip address 10.200.200.2 255.255.255.252
> duplex auto
> speed auto
> mpls ip
> mpls traffic-eng tunnels
> !
> interface FastEthernet0/1
> description to brussels
> bandwidth 100000
> ip address 10.200.210.1 255.255.255.252
> duplex auto
> speed auto
> mpls ip
> mpls traffic-eng tunnels
> !
> !
> !
> ip explicit-path name brussels-frankfurt-berlin enable
> next-address 10.200.210.2
> next-address 10.200.212.2
> next-address 10.200.213.2
> next-address 10.200.215.2
> !
>
> paris#sho ip route
> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
> ia - IS-IS inter area, * - candidate default, U - per-user static
> route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is not set
>
> 10.0.0.0/8 is variably subnetted, 15 subnets, 2 masks
> O 10.200.202.0/30 [110/4] via 10.200.210.2, 00:56:59, FastEthernet0/1
> C 10.200.200.0/30 is directly connected, FastEthernet0/0
> C 10.200.210.0/30 is directly connected, FastEthernet0/1
> O 10.200.211.0/30 [110/2] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.214.0/30 [110/3] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.215.0/30 [110/3] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.212.0/30 [110/2] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.213.0/30 [110/3] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.254.4/32 [110/3] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.254.5/32 [110/3] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.254.6/32 [110/4] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.254.7/32 [110/5] via 10.200.210.2, 00:56:59, FastEthernet0/1
> O 10.200.254.1/32 [110/2] via 10.200.200.1, 00:57:00, FastEthernet0/0
> C 10.200.254.2/32 is directly connected, Loopback0
> O 10.200.254.3/32 [110/2] via 10.200.210.2, 00:57:00, FastEthernet0/1
>
> paris#sho mpls traffic-eng tunnels tunnel 1
>
> Name: paris_t1 (Tunnel1) Destination:
> 10.200.254.6
> Status:
> Admin: up Oper: up Path: valid Signalling: connected
>
> path option 2, type explicit brussels-frankfurt-berlin (Basis for
> Setup, path weight 4)
> Change in required resources detected: reroute pending
> Currently Signalled Parameters:
> Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity:
> 0x0/0xFFFF
> Metric Type: IGP (interface)
>
> Config Parameters:
> Bandwidth: 100000 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
> Metric Type: IGP (interface)
> AutoRoute: disabled LockDown: disabled Loadshare: 100000 bw-based
> auto-bw: disabled
>
> InLabel : -
> OutLabel : FastEthernet0/1, 28
> RSVP Signalling Info:
> Src 10.200.254.2, Dst 10.200.254.6, Tun_Id 1, Tun_Instance 108
> RSVP Path Info:
> My Address: 10.200.210.1
> Explicit Route: 10.200.210.2 10.200.212.1 10.200.212.2 10.200.213.1
> 10.200.213.2 10.200.215.1 10.200.215.2 10.200.254.6
> Record Route: NONE
> Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
> RSVP Resv Info:
> Record Route: NONE
> Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
> Shortest Unconstrained Path Info:
> Path Weight: 3 (IGP)
> Explicit Route: 10.200.210.1 10.200.210.2 10.200.212.1 10.200.212.2
> 10.200.214.1 10.200.214.2 10.200.254.6
> History:
> Tunnel:
> Time since created: 2 hours
> Time since path change: 1 hours, 22 minutes
> Current LSP:
> Uptime: 38 minutes, 44 seconds
> Selection: reoptimation
> Last Error: PCALC:: Can't use link 10.200.210.1 on node 10.200.254.2
> Prior LSP:
> ID: path option 2 [107]
> Removal Trigger: configuration changed
> Last Error: PCALC:: Can't use link 10.200.210.1 on node 10.200.254.2
> paris#
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 30 2011 - 16:20:42 ART