Re: SLA failure trap

This assumes there is a trap preconfigured for you, but it will need to be a
time reporting SLA:
 
snmp-server enable trap rtr
ip sla 1
 icmp-echo 1.1.1.1
ip sla schedule 1 start now recurr
ip sla reaction-configuration 1 react (and
the rest are variables of what you want to do).
 
 
HOU-SW1(config)#ip sla
reaction-configuration 1 react ?
  connectionLoss Connection Loss
 
icpif Calculated Planning Impairment Factor
 
jitterAvg Jitter Average in both the directions
 
jitterDSAvg Jitter Average in the direction from Destination
to Source
  jitterSDAvg Jitter Average in the direction from Source
to Destination
  maxOfNegativeDS Maximum negative jitter from Destination
to Source
  maxOfNegativeSD Maximum negative jitter from Source to
Destination
  maxOfPositiveDS Maximum positive jitter from Destination to
Source
  maxOfPositiveSD Maximum positive jitter from Source to
Destination
  mos MOS Score
  packetLateArrival Packets
arriving Late
  packetLossDS Packet Loss in the direction from
Destination to Source
  packetLossSD Packet Loss in the direction from
Source to Destination
  packetMIA Missing In Action
 
packetOutOfSequence Packets arriving out of sequence
  rtt
Round Trip Time
  timeout timeout
  verifyError Verify
Error
 
That should get you started.

Regards,
Jay McMickle- CCNP, CCSP,
CCDP, MCSE

________________________________
From: amin <amin_at_axizo.com>
To: ccielab_at_groupstudy.com
Sent: Sunday, March 18, 2012 3:45 AM
Subject: SLA
failure trap

Hi experts,

How I can attached an IP SLA failure to send SMP
trap?

Regards,

Amin

Amin

AXIZO.COM

Previously name Horizon

'
+970-2-2988128 | 7 +970-2-2988128 |P +970-59-9367950 | .
<mailto:gila_at_lan-tech.co.il> amin_at_axizo.com

Blogs and organic groups at
http://www.ccie.net
Received on Sun Mar 18 2012 - 12:55:01 ART