Re: gns3

Also, try this:

Idlemax = 100

It helps a great deal with an idlepc

On Mar 21, 2012, at 19:33, john matijevic <john.matijevic_at_gmail.com> wrote:

> Thanks Brian,
>
> As the image i have been working on has been limited in terms of MPLS
> and IPV6 features.
> Thanks for your feedback!
>
> Regards,
> John
> On 3/21/12, Brian Dennis <bdennis_at_ine.com> wrote:
>> John,
>> This image will have everything you need (IPv6, MPLS, EEM, OER/PfR, etc):
>>
>> R5# sho ver
>> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version
>> 12.4(15)T13, RELEASE SOFTWARE (fc3)
>> Technical Support: http://www.cisco.com/techsupport
>> Copyright (c) 1986-2010 by Cisco Systems, Inc.
>> Compiled Wed 07-Apr-10 12:44 by prod_rel_team
>>
>> ROM: ROMMON Emulation Microcode
>> ROM: 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version 12.4(15)T13,
>> RELEASE SOFTWARE (fc3)
>>
>> R5 uptime is 9 minutes
>> System returned to ROM by unknown reload cause - suspect
>> boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
>> System image file is "tftp://255.255.255.255/unknown"
>>
>>
>> This product contains cryptographic features and is subject to United
>> States and local country laws governing import, export, transfer and
>> use. Delivery of Cisco cryptographic products does not imply
>> third-party authority to import, export, distribute or use encryption.
>> Importers, exporters, distributors and users are responsible for
>> compliance with U.S. and local country laws. By using this product you
>> agree to comply with applicable laws and regulations. If you are unable
>> to comply with U.S. and local laws, return this product immediately.
>>
>> A summary of U.S. laws governing Cisco cryptographic products may be
>> found at:
>> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>>
>> If you require further assistance please contact us by sending email to
>> export_at_cisco.com.
>>
>> Cisco 3725 (R7000) processor (revision 0.1) with 249856K/12288K bytes of
>> memory.
>> Processor board ID FTX0945W0MY
>> R7000 CPU at 240MHz, Implementation 39, Rev 2.1, 256KB L2, 512KB L3 Cache
>> 2 FastEthernet interfaces
>> DRAM configuration is 64 bits wide with parity enabled.
>> 55K bytes of NVRAM.
>> 16384K bytes of ATA System CompactFlash (Read/Write)
>>
>> Configuration register is 0x2102
>>
>> R5#
>>
>> --
>> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
>> bdennis_at_ine.com
>>
>> Internetwork Expert, Inc.
>> http://www.INE.com
>>
>> On 03/21/2012 05:47 AM, john matijevic wrote:
>>> Good Morning Brian,
>>>
>>> Are you able to run IPV6 over EIGRP with this image?
>>> For example the following command under an interface:
>>> ipv6 eigrp 1
>>> or to enable IPV6 with EIGRP in Global config:
>>> ipv6 router eigrp 1
>>>
>>>
>>> I have a similar image but cannot.
>>>
>>> Also are you able to configure the following commands with MPLS?
>>> address-family vpnv4
>>> mpls ip
>>>
>>> again I cannot run these commands with image I have.
>>>
>>>
>>>
>>>
>>>
>>> Regards,
>>> John
>>>
>>> On 3/16/12, Brian Dennis<bdennis_at_ine.com> wrote:
>>>> R3#sho ver
>>>> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version
>>>> 12.4(15)T13, RELEASE SOFTWARE (fc3)
>>>> Technical Support: http://www.cisco.com/techsupport
>>>> Copyright (c) 1986-2010 by Cisco Systems, Inc.
>>>> Compiled Wed 07-Apr-10 12:44 by prod_rel_team
>>>>
>>>> R6#sho ver
>>>> Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version
>>>> 12.4(24)T3, RELEASE SOFTWARE (fc2)
>>>> Technical Support: http://www.cisco.com/techsupport
>>>> Copyright (c) 1986-2010 by Cisco Systems, Inc.
>>>> Compiled Tue 23-Mar-10 13:16 by prod_rel_team
>>>>
>>>> brian_at_CCIE2210 ~ $ ./dynamips-0.2.8-RC3-community-x86_64.bin
>>>> Cisco Router Simulation Platform (version 0.2.8-RC3-amd64/Linux stable)
>>>> Copyright (c) 2005-2011 Christophe Fillot.
>>>> Build date: Nov 12 2011 18:42:02
>>>>
>>>> brian_at_CCIE2210 ~ $ lshw -class processor
>>>> *-cpu
>>>> description: CPU
>>>> product: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
>>>> vendor: Intel Corp.
>>>> physical id: 1
>>>> bus info: cpu_at_0
>>>> version: Intel(R) Core(TM) i7-2960XM CPU @ 2.70GHz
>>>> serial: Not Supported by CPU
>>>> slot: CPU
>>>> size: 1800MHz
>>>> capacity: 1800MHz
>>>> width: 64 bits
>>>> clock: 100MHz
>>>> capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae
>>>> mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr
>>>> sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs
>>>> bts nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor
>>>> ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt
>>>> aes xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi
>>>> flexpriority ept vpid cpufreq
>>>> configuration: cores=4 enabledcores=4 threads=8
>>>>
>>>> brian_at_CCIE2210 ~ $ uname -a
>>>> Linux CCIE2210 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC
>>>> 2011 x86_64 x86_64 x86_64 GNU/Linux
>>>>
>>>> --
>>>> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
>>>> bdennis_at_ine.com
>>>>
>>>> Internetwork Expert, Inc.
>>>> http://www.INE.com
>>>>
>>>>
>>>> On 03/15/2012 09:59 PM, Nish Vamadevan wrote:
>>>>> hi Brian,
>>>>>
>>>>> Which ios version do you use, the exact code?
>>>>>
>>>>> Cheers!
>>>>>
>>>>> Sent from my BlackBerry. wireless device
>>>>>
>>>>> -----Original Message-----
>>>>> From: Brian Dennis<bdennis_at_ine.com>
>>>>> Sender: nobody_at_groupstudy.com
>>>>> Date: Thu, 15 Mar 2012 21:41:04
>>>>> To:<ccielab_at_groupstudy.com>
>>>>> Reply-To: Brian Dennis<bdennis_at_ine.com>
>>>>> Subject: Re: gns3
>>>>>
>>>>> I use GNS3 on Mint 12 (Lenovo W520) with an Intel Core i7-2920X and 16GB
>>>>> of RAM. This can easily run 10 routers and not break above 15 or 20%
>>>>> CPU once the idle-pc is configured. No matter what hardware you use,
>>>>> the idle-pc value is key.
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 21 2012 - 19:42:26 ART