RE: CUCM 8.6 and Codec

With regards to your question about configuring codec per phone, the answer
yes it's possible.
Here is a link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_c1h
t.html#wp1074958

Please read usage guideline for possible caveats.
codec (ephone)
To select a preferred codec for Cisco Unified CME to use when configuring
calls for a phone, use the codec command in ephone or ephone-template
configuration mode. To return to the command default, use the no form of this
command.
codec {g711ulaw | g722r64 | g729r8 [dspfarm-assist] | ilbc}
no codec

Hth

Jojo

> From: go_soon2010_at_hotmail.com
> To: rwest_at_zyedge.com; msnow_at_ine.com
> CC: ccielab_at_groupstudy.com
> Subject: RE: CUCM 8.6 and Codec
> Date: Fri, 7 Sep 2012 01:56:10 +0300
>
> each site has only 2 IP Phones so we don't need to put CME at each site .
> But how can I hardcod the codec in the ephone ?
> I know That i can do that by using codec command under ephone
>
> ephone 1codec g729
> Is that right?
>
>
> > From: rwest_at_zyedge.com
> > To: msnow_at_ine.com
> > CC: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> > Subject: Re: CUCM 8.6 and Codec
> > Date: Thu, 6 Sep 2012 21:50:44 +0000
> >
> > Ine forums, but maybe it was in the wrong context.
> >
> > Sent from handheld
> >
> > On Sep 6, 2012, at 5:30 PM, "Mark Snow"
<msnow_at_ine.com<mailto:msnow_at_ine.com>>
> > wrote:
> >
> > I did?
> > When was that? :-)
> >
> > Ryan's idea of hardcoding the codec in the ephone is probably your best
bet,
> > although it would mean that they are G.729 within their 'branch' sites as
> > well.
> >
> > Question Iam: How many phones are at each site? Why not just turn up CME
on
> > each branch router and build simple dial-peers between sites - or even
better
> > yet - use CCDoSAF to build them for you?
> >
> >
> > Kind Regards,
> >
> > Mark Snow
> > CCIE #14073
> > (Voice, Security)
> > DCUFI, DCUFD
> > DCUCI, DCUCD
> > Instructor
> > INE<http://ine.com/>
> >
> >
> >
> > On Sep 6, 2012, at 12:38 PM, Ryan West
> > <rwest_at_zyedge.com<mailto:rwest_at_zyedge.com>> wrote:
> >
> > Since they aren't actually sites, you may be stuck using static codecs are
on
> > the ephone's themselves. Mark Snow mentioned something about using CUBE,
but
> > I'm not sure how that would apply here.
> >
> > -ryan
> >
> > From: Iam Here [mailto:go_soon2010@hotmail.com<http://hotmail.com>]
> > Sent: Thursday, September 06, 2012 10:59 AM
> > To: Ryan West; ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com>
> > Subject: RE: CUCM 8.6 and Codec
> >
> > The Ip Phones in the branches register from the CUCME in the HQ so there
is
> > no
> > dial-peer
> > ________________________________
> > From: rwest_at_zyedge.com<mailto:rwest_at_zyedge.com><mailto:rwest_at_zyedge.com>
> > To:
> >
go_soon2010_at_hotmail.com<mailto:go_soon2010_at_hotmail.com><mailto:go_soon2010_at_ho
> > tmail.com>;
> >
ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:ccielab_at_groupstu
> > dy.com>
> > Subject: RE: CUCM 8.6 and Codec
> > Date: Thu, 6 Sep 2012 14:57:28 +0000
> > Specify in dial-peer or use a voice-class or a gatekeeper.
> >
> > From: Iam Here
> >
[mailto:go_soon2010@hotmail.com<http://hotmail.com>]<mailto:[mailto:go_soon20
> > 10@hotmail.com<http://hotmail.com>]>
> > Sent: Thursday, September 06, 2012 10:57 AM
> > To: Ryan West;
> >
ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:ccielab_at_groupstu
> > dy.com>
> > Subject: RE: CUCM 8.6 and Codec
> >
> > Sorry I got mistake I mean CUCME not CUCM I know the regions in CUCM
> > From: rwest_at_zyedge.com<mailto:rwest_at_zyedge.com><mailto:rwest_at_zyedge.com>
> > To:
> >
go_soon2010_at_hotmail.com<mailto:go_soon2010_at_hotmail.com><mailto:go_soon2010_at_ho
> > tmail.com>;
> >
ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:ccielab_at_groupstu
> > dy.com>
> > Subject: RE: CUCM 8.6 and Codec
> > Date: Thu, 6 Sep 2012 14:54:58 +0000
> >
> > Regions.
> >
> > -----Original Message-----
> > From:
> >
nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com><mailto:nobody_at_groupstudy.
> > com>
> >
[mailto:nobody@groupstudy.com<http://groupstudy.com>]<mailto:[mailto:nobody@g
> > roupstudy.com<http://groupstudy.com>]> On
> > Behalf Of Iam Here
> > Sent: Thursday, September 06, 2012 10:53 AM
> > To:
> >
ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:ccielab_at_groupstu
> > dy.com>
> > Subject: CUCM 8.6 and Codec
> >
> > I have CUCM 8.6 at HQ and 5 branches ,I'd like to use G711 inside the
> > HQ(Lan) and G729 between the HQ and the branches .
> > Any support will be appreciated
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 06 2012 - 22:37:52 ART