Here's a link that says that Intel ICH10R1 doesn't support SAS
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/C200M1.pdf
> From: martin_at_kiefer.dk
> To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> Subject: SV: Cisco UCS C200 M2
> Date: Mon, 15 Oct 2012 22:06:07 +0200
> 
> Hi.
> 
>  
> 
> I would be surprised that the controller does not support your drive, I have
> used old 5400RPM 2.5" drives for testing purposes on these without any
> problems. Did you configure the onboard controller in BIOS?
> 
>  
> 
> If so, you should see the controller during the boot process.
> 
>  
> 
> It needs to be activated in order to see both the disk and the dvd-drive.
> 
>  
> 
> Best reply
> 
> Martin
> 
>  
> 
> Fra: Iam Here [mailto:go_soon2010_at_hotmail.com] 
> Sendt: 15. oktober 2012 13:02
> Til: martin_at_kiefer.dk; ccielab_at_groupstudy.com
> Emne: RE: Cisco UCS C200 M2
> 
>  
> 
> I have Intel ICH10R Controller and it seems that it doesn't support the SAS
> HardDrive  
>  
> So I have big problem now
> What is the difference between the LSI HW/SW Raid ? Could I upgrade the
> ICH10R to LSI
> 
> 
> 
> > From: martin_at_kiefer.dk
> > To: go_soon2010_at_hotmail.com
> > CC: ccielab_at_groupstudy.com
> > Subject: Re: Cisco UCS C200 M2
> > Date: Sun, 14 Oct 2012 22:23:15 +0000
> > 
> > You need to configure the boot parameter either during the boot procedure
> or 
> > within the BIOS settings. 
> > 
> > Either way, both needs to be configured as well. 
> > 
> > does the server have the on board LSI software RAID or is it the LSI 
> > hardware RAID? 
> > 
> > Btw I usually use a ISO image through the CIMC works like a charm :-) 
> > 
> > Best regards
> > Martin 
> > 
> > Iam Here writes: 
> > 
> > > I have Cisco UCS C200 M2 with SAS 15K 450GB . When I put a bootable DVD
> the Server keeps giving me the following error 
> > > 
> > > PXE-E61: Media test failure, check cable
> > > PXE-M0F: Exiting Intel Boot Agent 
> > > 
> > > Reboot and select proper boot device
> > > or insert Boot Media in selected Boot device and press a key 
> > > 
> > > 
> > > I don't have an experience in the server so i need your help .
> > > Thanks in Advance 
> > > 
> > > 
> > > Blogs and organic groups at http://www.ccie.net 
> > > 
> > > _______________________________________________________________________
> > > Subscription information may be found at: 
> > > http://www.groupstudy.com/list/CCIELab.html 
> > 
> > 
> > Blogs and organic groups at http://www.ccie.net
> > 
> > _______________________________________________________________________
> > Subscription information may be found at: 
> > http://www.groupstudy.com/list/CCIELab.html
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 16 2012 - 00:24:37 ART
This archive was generated by hypermail 2.2.0 : Thu Nov 01 2012 - 10:53:33 ART