Re: MQC GTS based policy

are you doing MQC FRTS OR CBTS ?

On Fri, Mar 22, 2013 at 9:55 PM, marc edwards <renorider_at_gmail.com> wrote:

> The way I read 'Router policy should match pvc 305' would defer to option
> 2.
>
> Marc Edwards
> CCIE #38259
>
>
> On Thu, Mar 21, 2013 at 9:02 AM, ccie99999 <ccie99999_at_gmail.com> wrote:
> > trying to re-send this.. if someone can help. Thanks.
> >
> >
> > ---------- Forwarded message ----------
> > From: ccie99999 <ccie99999_at_gmail.com>
> > Date: Wed, Mar 6, 2013 at 4:57 AM
> > Subject: MQC GTS based policy
> > To: Cisco certification <ccielab_at_groupstudy.com>
> >
> >
> > Hi guys,
> >
> > in my lab I've to shape to an average rate of 256k with bc and be of
> 12800
> > and 6400.
> > Router policy should match pvc 305.
> >
> > I think there are 2 ways to do same thing here.. can you confirm the end
> > result is the same ? (at least looks so from my show policy-map inter
> > command)
> >
> > sh policy-map
> >
> > *option n.1*
> >
> > class-map DLCI_305
> > match fr-dlci 305
> >
> > policy-map POLICY_FR_OUT
> > class DLCI_305
> > shape average 256000 12800 6400
> >
> > int se1/0
> > service-policy output POLICY_FR_OUT
> >
> > *option n.2*
> >
> > policy-map ALL
> > class class-default
> > shape average 256000 12800 6400
> >
> > map-class frame-relay DLCI_305
> > service-policy output ALL
> >
> > int se1/0
> > frame-relay interface-dlci 305
> > class DLCI_305
> >
> >
> > *VERIFICATION option 1*
> >
> > Rack1R3#show policy-map inter se1/0
> >
> > Serial1/0
> >
> > Service-policy output: POLICY_FR_OUT
> >
> > Class-map: DLCI_305 (match-all)
> > 3 packets, 384 bytes
> > 5 minute offered rate 0 bps, drop rate 0 bps
> > Match: fr-dlci 305
> > Traffic Shaping
> > Target/Average Byte Sustain Excess Interval
> Increment
> > Rate Limit bits/int bits/int (ms) (bytes)
> > 256000/256000 2400 12800 6400 50 1600
> >
> > Adapt Queue Packets Bytes Packets Bytes Shaping
> > Active Depth Delayed Delayed Active
> > - 0 3 384 0 0 no
> >
> > Class-map: class-default (match-any)
> > 1 packets, 14 bytes
> > 5 minute offered rate 0 bps, drop rate 0 bps
> > Match: any
> >
> > *VERIFICATION option 2*
> >
> > Rack1R3#show policy-map inter se1/0
> > Serial1/0: DLCI 305 -
> >
> > Service-policy output: ALL
> >
> > Class-map: class-default (match-any)
> > 1 packets, 84 bytes
> > 5 minute offered rate 0 bps, drop rate 0 bps
> > Match: any
> > Traffic Shaping
> > Target/Average Byte Sustain Excess Interval
> Increment
> > Rate Limit bits/int bits/int (ms) (bytes)
> > 256000/256000 2400 12800 6400 50 1600
> >
> > Adapt Queue Packets Bytes Packets Bytes Shaping
> > Active Depth Delayed Delayed Active
> > - 0 1 84 0 0 no
> >
> > thanks in advance!
> >
> >
> > --
> > @ccie99999
> > https://twitter.com/ccie99999
> >
> >
> >
> > --
> > @ccie99999
> > https://twitter.com/ccie99999
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 22 2013 - 22:54:56 ART