Re: 2511 Router

Thanks for your response

my goal is to have all 8 sessions displayed on my screen active view and
not use control shift 6 X.
 I have secure CRT and would like to have all 8 tabs on Secure CRT dash, if
possible not going back and forth between routers using control shift 6 X.

am using a 32'' monitor and would like to see all changes and screen
messages of each Device.
is this possible?

yes I do have
the recommended configs on my AS.

 Thanks

On Sat, Jun 1, 2013 at 4:43 PM, Adam Booth <adam.booth_at_gmail.com> wrote:

> Hi Davito,
>
> It can be done with a 2511 without drama. You configure the 2511 for
> reverse telnet like you would if you were to establish individual sessions
>
> e.g.
>
> ip host R1 2001 10.1.1.1
> ip host R2 2002 10.1.1.1
> ip host R3 2003 10.1.1.1
>
> line 1 16
> no exec
> transport input all
>
>
> then when you ssh/telnet to the 2511 to access the first device type "R1"
> then get back to the 2511 command prompt by typing control shift 6 X (that
> is hold control, then shift)
> You can then type "R2" to access R2
>
> When you want to get back to R1 after you had opened the session but are
> currently somewhere else you can type "resume R1"
>
> Use the "Show line" for active sessions and "Clear line x" to kill that
> session if you need to..
>
> Cheers,
> Adam

Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 01 2013 - 17:47:01 ART