Re: RIPng UDP port

The significance is that only one routing process will be able to run on the udp port number 520,hence,if you've got two routing process on the same router,you will need to manually assign another udp port to take care of the second routing process.

I hope this helps. You can check TCP/IP vol. 1 by Jeff Doyle.

Cheers.
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Narbik Kocharians <narbikk_at_gmail.com>
Sender: nobody_at_groupstudy.com
Date: Thu, 8 Aug 2013 14:08:37
To: routingfreak<routingfreak_at_gmail.com>
Reply-To: Narbik Kocharians <narbikk_at_gmail.com>
Cc: Joe Sanchez<marco207p_at_gmail.com>; Daniel Barney BriseC1o<daniel.barney.b_at_hotmail.com>; CCIE Group Study<ccielab_at_groupstudy.com>
Subject: Re: RIPng UDP port

You can configure it under the routing process.

IPv6 router rip tst
  Port 5021

On Thu, Aug 8, 2013 at 1:11 PM, routingfreak <routingfreak_at_gmail.com> wrote:

> I am not seeing the command which u have mentioned. Which particular
> release r u using . Ca n tell me the significance f this command.
>
>
> On Thu, Aug 8, 2013 at 1:07 AM, Joe Sanchez <marco207p_at_gmail.com> wrote:
>
> > Do you have a link for the documentation?
> >
> > Regards,
> > Joe Sanchez
> >
> > ( please excuse the brevity of this email as it was sent via a mobile
> > device.
> > Please excuse misspelled words or sentence structure.)
> >
> > On Aug 7, 2013, at 11:03 AM, Daniel Barney BriseC1o
> > <daniel.barney.b_at_hotmail.com> wrote:
> >
> > > Guys
> > > I found it! Rip processes do not separate with different rip process
> > labels.
> > > To separate the routing information between two diffent rip label
> > process we
> > must change the port of under de routing process with port port-number
> > multicast-group multicast-address
> > >
> > >
> > > > CC: daniel.barney.b_at_hotmail.com; ccielab_at_groupstudy.com
> > > > From: marco207p_at_gmail.com
> > > > Subject: Re: RIPng UDP port
> > > > Date: Tue, 6 Aug 2013 09:04:07 -0500
> > > > To: narbikk_at_gmail.com
> > > >
> > > > AFAIK, only if you VRF it out.
> > > >
> > > > Regards,
> > > > Joe Sanchez
> > > >
> > > > ( please excuse the brevity of this email as it was sent via a mobile
> > device. Please excuse misspelled words or sentence structure.)
> > > >
> > > > On Aug 6, 2013, at 6:19 AM, Narbik Kocharians <narbikk_at_gmail.com>
> > wrote:
> > > >
> > > > > Daniel,
> > > > >
> > > > > Are you talking about running two different RIPng processes on the
> > same
> > > > > router?
> > > > >
> > > > >
> > > > > On Mon, Aug 5, 2013 at 6:38 PM, Daniel Barney Briseqo <
> > > > > daniel.barney.b_at_hotmail.com> wrote:
> > > > >
> > > > >> Hello every one,A couple of weeks ago I read about RIPng, Today
> > while
> > > > >> doing a lab, a doubt came to me and I could find the reference
> > back. I
> > was
> > > > >> hoping you guys can help me.
> > > > >> When having two different RIPng labels, Do we need to change de
> udp
> > port
> > > > >> 521
> > > > >> for one routing process in order to work? If yes, how can we
> archive
> > this
> > > > >> and
> > > > >> if possible could you send me the link reference please
> > > > >> Thank you :)Daniel Barney
> > > > >>
> > > > >>
> > > > >> Blogs and organic groups at http://www.ccie.net
> > > > >>
> > > > >>
> > _______________________________________________________________________
> > > > >> Subscription information may be found at:
> > > > >> http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > > --
> > > > > *Narbik Kocharians
> > > > > *CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> > > > > *www.MicronicsTraining.com* <http://www.micronicstraining.com/>
> > > > > Sr. Technical Instructor
> > > > > YES! We take Cisco Learning Credits!
> > > > > A Cisco Learning Partner
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards
> Routing Freak CCIE#35889 (SPv3)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*Narbik Kocharians
*CCSI#30832, CCIE# 12410 (R&S, SP, Security)
*www.MicronicsTraining.com* <http://www.micronicstraining.com/>
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
A Cisco Learning Partner
Blogs and organic groups at http://www.ccie.net