Re: rpf neighbor seleciton

In multicast RPF behavior is based on unicast routing table , for
example if the multicast source ip ( the streamer ) is learned from
neighbor with interface fa 0/0 , and you are recieving multicast traffic
from fa 0/1 RPF check will fail
Default mroute means that every multicast src should be learned from
this specific neighbor.

On 01/12/2014 10:41 PM, Imran Ali wrote:
> i mean to say default mroute
>
>
> On Sun, Jan 12, 2014 at 9:40 PM, Imran Ali <immrccie_at_gmail.com> wrote:
>
>> Hi all
>>
>> in unicast routing next hop is selected based on longest match , then
>> based on lower AD , then finally based on metric .
>>
>> in multicast how rpf next hop is selected ?
>>
>> is it based on longest match ? or AD ?
>>
>> let say i have default route over tunnel with a better AD , then
>> a more specific External Multi Protocol multicast Bgp
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 12 2014 - 23:33:04 ART