Re: ISIS Issue between XR and IOS

i dont think that is the requirement Gaurav, anyways i have even tried
that, must be a hardware issue , tried on INE labs and it works fine with
the same configuration, virtualisation has its own impact on time ! :)

Below is from INE lab

router isis 1
 net 49.0001.0000.0000.0020.00
 interface Loopback0
  passive
  address-family ipv4 unicast
  !
 !
 interface GigabitEthernet0/4/0/0.620
  address-family ipv4 unicast
  !
 !
!

RP/0/3/CPU0:XR2#show isis neighbors
Wed Oct 25 11:36:33.610 UTC

IS-IS 1 neighbors:
System Id Interface SNPA State Holdtime Type IETF-NSF
R6 Gi0/4/0/0.620 0004.4e11.2800 Up 7 L1L2 Capable

On Sat, Jun 7, 2014 at 10:10 AM, GAURAV MADAN <gauravmadan1177_at_gmail.com>
wrote:

> on XR ; you have not activated the address-family on protocol level . You
> have just activated under interface. Please correct the same
>
>
> On 7 June 2014 08:23, Rakesh M <raaki.88_at_gmail.com> wrote:
>
>> Hi,
>>
>> I am trying to run isis between IOS-XRV 5.3.2 and Cisco 7600 Series, Both
>> are emulated
>> version for FYI.
>>
>> ospf appears to form fine, and IOS-TO-IOS ISIS is also fine, I am unable
>> to
>> relate
>> why XR-IOS isis-adj is not coming up.
>>
>> !
>> router isis 1
>> net 49.0001.0000.0000.0006.00
>> is-type level-2-only
>> !
>>
>> R6#
>> R6#show runn int fa0/0.620
>> Building configuration...
>>
>> Current configuration : 182 bytes
>> !
>> interface FastEthernet0/0.620
>> encapsulation dot1Q 620
>> ip address 20.6.20.6 255.255.255.0
>> ip router isis 1
>> mpls ip
>> mpls label protocol ldp
>> isis circuit-type level-2-only
>> end
>>
>>
>> *Jun 7 08:21:11.159: ISIS-Adj: Sending L2 LAN IIH on FastEthernet0/0.620,
>> length 1497
>> R6#
>> *Jun 7 08:21:16.019: ISIS-Adj: Rec L2 IIH from 000c.293b.1023
>> (FastEthernet0/0.620), cir type L2, cir id 0000.0000.0020.01, length 1497
>> R6#
>>
>>
>> on XR
>>
>> RP/0/0/CPU0:XR2#
>> RP/0/0/CPU0:XR2#show runn router isis
>> Sat Jun 7 08:22:26.395 UTC
>> router isis 1
>> is-type level-2-only
>> net 49.0001.0000.0000.0020.00
>> interface Loopback0
>> passive
>> address-family ipv4 unicast
>> !
>> !
>> interface GigabitEthernet0/0/0/0.620
>> circuit-type level-2-only
>> address-family ipv4 unicast
>> !
>> !
>> !
>>
>> RP/0/0/CPU0:XR2#show runn int gig0/0/0/0.620
>> Sat Jun 7 08:22:38.025 UTC
>> interface GigabitEthernet0/0/0/0.620
>> ipv4 address 20.6.20.20 255.255.255.0
>> encapsulation dot1q 620
>> !
>>
>>
>> RP/0/0/CPU0:XR2#
>> RP/0/0/CPU0:XR2#show isis int gig0/0/0/0.620
>> Sat Jun 7 08:22:52.124 UTC
>>
>> GigabitEthernet0/0/0/0.620 Enabled
>> Adjacency Formation: Enabled
>> Prefix Advertisement: Enabled
>> IPv4 BFD: Disabled
>> IPv6 BFD: Disabled
>> BFD Min Interval: 150
>> BFD Multiplier: 3
>>
>> Circuit Type: level-2-only
>> Media Type: LAN
>> Circuit Number: 1
>>
>> Level-2
>> Adjacency Count: 0
>> LAN ID: XR2.01
>> Priority (Local/DIS): 64/none (no DIS elected)
>> Next LAN IIH in: 6 s
>> LSP Pacing Interval: 33 ms
>> PSNP Entry Queue Size: 0
>>
>> CLNS I/O
>> Protocol State: Up
>> MTU: 1497
>> SNPA: 000c.293b.1023
>> Layer-2 MCast Groups Membership:
>> All Level-2 ISs: Yes
>>
>> IPv4 Unicast Topology: Enabled
>> Adjacency Formation: Running
>> Prefix Advertisement: Running
>> Metric (L1/L2): 0/10
>> Weight (L1/L2): 0/0
>> MPLS LDP Sync (L1/L2): Disabled/Disabled
>>
>> IPv4 Address Family: Enabled
>> Protocol State: Up
>> Forwarding Address(es): 20.6.20.20
>> Global Prefix(es): 20.6.20.0/24
>>
>> LSP transmit timer expires in 0 ms
>> LSP transmission is idle
>> Can send up to 10 back-to-back LSPs in the next 0 ms
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 07 2014 - 10:30:05 ART