Re: IPv6 first hop

Hi,

 You need 15.2(4)M minimum for that. Officially, there is no 15.2 IOS code for
ISR G1 (it stopped at 15.1), so you need to go with ISR G2.

Regards,
Cristian Matei, 2 x CCIE #23684 (R&S/SC)
cmatei_at_INE.com<mailto:cmatei_at_INE.com>

Internetwork Expert, Inc.
http://www.INE.com<http://www.ine.com/>

On 09 Jun 2014, at 22:15, Daniel Barney Briseqo
<daniel.barney.b_at_hotmail.com<mailto:daniel.barney.b_at_hotmail.com>> wrote:

Hello everyone, on the weekend I start studying IPv6 first hop security
(Section 4.2.c of RSv5 blueprint)First command on the config guide, but it is
not there.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6_fhsec/configuration/15-
mt/ip6f-15-mt-book/ip6-ra-guard.html
R1(config)#ipv6 nd ? cache Cache entry dad Duplicate
Address Detection nsf NSF nud NUD reachable-time
Set advertised reachability time resolution resolution route-owner
ND as route owner secured Configure IPv6 SEND default parameters

R1#show version | i Cisco IOS Software,Cisco IOS Software, 2800 Software
(C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M8, RELEASE SOFTWARE (fc2)
[Q]For this section, what do you guys recommend me to do? Or what version to
use?Thanks all

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 09 2014 - 14:47:02 ART