Re: IPSec and DMVPN

Um, yeah. We're going to need the spoke and hub configs to help. If this is production, ensure you remove the real IP's.

Regards,
Jay McMickle- 2x CCIE #35355 (R/S,Sec)
Sent from my iPhone 5

> On Jun 20, 2014, at 4:48 PM, Daniel Barney BriseC1o <daniel.barney.b_at_hotmail.com> wrote:
>
> Hello everyone,Today on my studies, the state of one of my DMPVN was IKE.R6#sh
> dmvpnLegend: Attrb --> S - Static, D - Dynamic, I - Incomplete N -
> NATed, L - Local, X - No Socket # Ent --> Number of NHRP entries with
> same NBMA peer NHS Status: E --> Expecting Replies, R --> Responding, W
> --> Waiting UpDn Time --> Up or Down Time for a
> Tunnel=======================================================================
> ===
> Interface: Tunnel100, IPv4 NHRP Details Type:Spoke, NHRP Peers:2,
> # Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb -----
> --------------- --------------- ----- -------- ----- 1 3.3.3.3
> 148.15.1.3 IKE 00:22:25 DX 1 5.5.5.5 148.15.1.5 UP
> 00:22:58 S
> My pre-shared key on my hub and my spokes is set to address 0.0.0.0
> 0.0.0.0.0.Can you guys help me what I should be checking?Thank you!
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jun 20 2014 - 18:40:03 ART