Re: Cisco-HP ?

There is a whole lot variables that come into play here. Do the blade
chassis have internal passthroughs, Hp switching modules, or cisco
switching modules. If HP they don't support RPVST so you are better off
configuring the whole network with MST.
I would need to see diagrams and configurations to be much help. My
consulting rate is $200/hr.
On Oct 2, 2014 6:48 PM, "Cisco Fanatic" <ebay_products_at_hotmail.com> wrote:

> This is really getting to my nerves. I have a WS-C4500X-16SFP+ switch
> connected to HP Blade and we already had 2 outages in the past week.
> HP is saying that they don't see an issue on their blades and Cisco TAC is
> saying it's to do with HP blade which is running VMs that is causing
> spanning
> tree issues.
> Please I needs some insight into this from people who have worked on HP and
> Cisco platform.
> Are there any know interoperability issues between Cisco and HP?
> Also, is there a best practice design which explain how to connect Cisco
> with
> HP Blade Servers?
> Yuri
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Oct 02 2014 - 18:53:10 ART