IP Policy routing question

From: Denton Bobeldyk (denny@xxxxxxxxxxxxxx)
Date: Tue Jan 04 2000 - 17:41:12 GMT-3

   
Hello All,
    I have a single router that I setup for policy routing, but
for some reason the route-map stmt is matching more than
I sould like it to. The route-map doesn't do anything constructive,
it's just a simplified version of another problem I was having.
Below are the config and the ping with debug ip policy enabled:

r6#sh ru
Building configuration...

Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r6
!
!
ip subnet-zero
no ip domain-lookup
!
interface Loopback0
 ip address 10.44.1.1 255.255.255.0
!
interface Loopback1
 ip address 10.44.2.1 255.255.255.0
!
interface Ethernet0
 ip address 10.4.1.1 255.255.0.0
!
interface Ethernet1
 ip address 10.34.1.2 255.255.0.0
!
router ospf 1
 network 10.34.1.2 0.0.0.0 area 3
 network 10.44.1.1 0.0.0.0 area 44
 network 10.44.2.1 0.0.0.0 area 44
 network 10.4.1.1 0.0.0.0 area 3
 area 3 virtual-link 10.34.1.1
 area 44 range 10.44.0.0 255.255.0.0
!
ip local policy route-map LOCALPOLICY
no ip classless
access-list 10 permit 10.34.1.1
access-list 10 deny any
route-map LOCALPOLICY permit 10
 match ip next-hop 10
 match interface Ethernet1
 set ip next-hop 10.34.1.1
!
route-map LOCALPOLICY deny 20
!
!
line con 0
 exec-timeout 0 0
 length 0
line vty 0 4
 login
!
end

r6#

r6#debug ip policy
Policy routing debugging is on
r6#ping 10.4.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.4.1.1, timeout is 2 seconds:

IP: s=10.34.1.2 (local), d=224.0.0.5, len 64, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.34.1.2 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
IP: local to Ethernet1 10.34.1.1
IP: s=10.4.1.1 (local), d=224.0.0.5, len 64, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
IP: local to Ethernet1 10.34.1.1
IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
IP: local to Ethernet1 10.34.1.1.
IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
IP: local to Ethernet1 10.34.1.1.
IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
IP: local to Ethernet1 10.34.1.1.
IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
IP: local to Ethernet1 10.34.1.1.
IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
IP: local to Ethernet1 10.34.1.1.
Success rate is 0 percent (0/5)
r6#
IP: s=10.34.1.2 (local), d=224.0.0.5, len 64, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.34.1.2 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
IP: local to Ethernet1 10.34.1.1
IP: s=10.4.1.1 (local), d=224.0.0.5, len 64, policy match
IP: route map LOCALPOLICY, item 10, permit
IP: s=10.4.1.1 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
IP: local to Ethernet1 10.34.1.1u all
All possible debugging has been turned off
r6# 

--
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
Email: denny@kentwoodps.org
Phone: 616-530-9196

Master CNE - Connectivity
Cisco Certified Design Associate
Cisco Certified Network Associate
Cisco Certified Systems Instructor

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:42 GMT-3