From: Brad Hedlund (BHedlund@xxxxxxxxxxxxxxxxxxx)
Date: Tue Jan 04 2000 - 18:05:46 GMT-3
Denny,
I guess Im a little confused, maybe you can clarify the problem you are
trying to solve.
In your configuration your saying "Take all traffic that has a next-hop of
10.34.1.1 going out of Ethernet 0 and set its next-hop to 10.34.1.1"
What has that accomplished?
That route-map is doing nothing but getting in the way. Its not changing
anything.
Or, am I missing something?
-Brad
> Hello All,
> I have a single router that I setup for policy routing, but
> for some reason the route-map stmt is matching more than
> I sould like it to. The route-map doesn't do anything constructive,
> it's just a simplified version of another problem I was having.
> Below are the config and the ping with debug ip policy enabled:
>
>
> r6#sh ru
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname r6
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> interface Loopback0
> ip address 10.44.1.1 255.255.255.0
> !
> interface Loopback1
> ip address 10.44.2.1 255.255.255.0
> !
> interface Ethernet0
> ip address 10.4.1.1 255.255.0.0
> !
> interface Ethernet1
> ip address 10.34.1.2 255.255.0.0
> !
> router ospf 1
> network 10.34.1.2 0.0.0.0 area 3
> network 10.44.1.1 0.0.0.0 area 44
> network 10.44.2.1 0.0.0.0 area 44
> network 10.4.1.1 0.0.0.0 area 3
> area 3 virtual-link 10.34.1.1
> area 44 range 10.44.0.0 255.255.0.0
> !
> ip local policy route-map LOCALPOLICY
> no ip classless
> access-list 10 permit 10.34.1.1
> access-list 10 deny any
> route-map LOCALPOLICY permit 10
> match ip next-hop 10
> match interface Ethernet1
> set ip next-hop 10.34.1.1
> !
> route-map LOCALPOLICY deny 20
> !
> !
> line con 0
> exec-timeout 0 0
> length 0
> line vty 0 4
> login
> !
> end
>
> r6#
>
> r6#debug ip policy
> Policy routing debugging is on
> r6#ping 10.4.1.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.4.1.1, timeout is 2 seconds:
>
> IP: s=10.34.1.2 (local), d=224.0.0.5, len 64, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.34.1.2 (local), d=224.0.0.5 (Ethernet1), len 64,
> policy routed
> IP: local to Ethernet1 10.34.1.1
> IP: s=10.4.1.1 (local), d=224.0.0.5, len 64, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
> IP: local to Ethernet1 10.34.1.1
> IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
> IP: local to Ethernet1 10.34.1.1.
> IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
> IP: local to Ethernet1 10.34.1.1.
> IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
> IP: local to Ethernet1 10.34.1.1.
> IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
> IP: local to Ethernet1 10.34.1.1.
> IP: s=10.4.1.1 (local), d=10.4.1.1, len 100, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=10.4.1.1 (Ethernet1), len 100, policy routed
> IP: local to Ethernet1 10.34.1.1.
> Success rate is 0 percent (0/5)
> r6#
> IP: s=10.34.1.2 (local), d=224.0.0.5, len 64, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.34.1.2 (local), d=224.0.0.5 (Ethernet1), len 64,
> policy routed
> IP: local to Ethernet1 10.34.1.1
> IP: s=10.4.1.1 (local), d=224.0.0.5, len 64, policy match
> IP: route map LOCALPOLICY, item 10, permit
> IP: s=10.4.1.1 (local), d=224.0.0.5 (Ethernet1), len 64, policy routed
> IP: local to Ethernet1 10.34.1.1u all
> All possible debugging has been turned off
> r6#
>
>
>
>
> --
> -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
> Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
> Email: denny@kentwoodps.org
> Phone: 616-530-9196
>
> Master CNE - Connectivity
> Cisco Certified Design Associate
> Cisco Certified Network Associate
> Cisco Certified Systems Instructor
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:43 GMT-3