From: Andrew Yourtchenko (andin@xxxxxx)
Date: Fri Feb 04 2000 - 04:21:57 GMT-3
Hello Bob,
Since AUX is an async-only interface, I don't believe Frame Relay is
possible there, so that must be a myth. The only encapsulations
supported on AUX (as of 11.2, at least) are ppp and slip.
with best regards,
Andrew Yourtchenko
CCIE #5423
/Systems Engineer
OCS distribution
phone. +7-812-324-2870 ext 244
mailto:andin@ocs.ru
http://www.ocs.ru/
Friday, February 04, 2000, 5:52:27 AM, you wrote:
KBCIC> somebody in this group mentioned config using AUX port to config frame
KBCIC> relay, can you post the config?
KBCIC> Thank you.
KBCIC> Bob
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:52 GMT-3