From: Michael Bausenwein (mikeb55@xxxxxxxx)
Date: Mon Apr 03 2000 - 23:46:42 GMT-3
I have a couple of configs attached that i setup in a lab environment.
There are 2 routers a 4700 and a 7507. Each one has 2 sub interfaces. On
one sub interface the 4700 is the ARP server and on the other the 7505 is
the arp server.
To configure the arp server use the atm arp-server self command.
to configure the remote to point to the atm-arp server use the arp-server
nsap command
Get the nsap of the Arp server by doing a show atm ilmi or show atm ilmi
status. ( included them at the bottom of the config, so you can tell which
witch is which :>)
Mike
----- Original Message -----
From: peter brown <pita40@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, April 03, 2000 9:20 PM
Subject: ATM
> Can anybody give me a sample configuration on ATM Classical ip and ATM
> PVC. The one in Caslow book is not enough. Can you please point me to a
link
> if possible.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:12 GMT-3