From: Scott Morris (smorris@xxxxxxxxxxxxxx)
Date: Fri Nov 03 2000 - 15:30:02 GMT-3
(config-if)ipx network (net) encapsulation (encap-type) secondary
Enjoy!
Scott Morris, MCSE, CNE(3.x), CCDP (R&S), CCIE (R&S) #4713, Security
Specialization, CCNA - WAN Switching
CCSI #21903
smorris@mentortech.com
----------------------------------------------------------------------------
------------------------------
Mentor Technologies Group, Inc. http://www.mentortech.com
Formerly Chesapeake Network Solutions http://www.ccci.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ronnie Royston
Sent: Friday, November 03, 2000 12:23 PM
To: ccielab@groupstudy.com
Subject: IPX - multiple frame encapsulations on one wire
I am trying to configure multiple IPX frame types on one e-net segment. It
works fine with subinterfaces but I can only specify one network if I simply
configure multiple net #s / encaps types under the main int. only. In the
latter case, the router takes the commands but only records the last
net#/frame type in the running config ??? According to CCO, this is
supposed to work without using subinterfaces. Any ideas? Thanks....
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3