Useful command to find ATM PVC's coming from LS1010 to router

From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Fri Nov 03 2000 - 21:06:56 GMT-3

   
  If you want to find the PVC's that are defined on the LS1010 for a router's A
TM connection
you can use the command "atm ilmi-pvc-discovery subinterface". This is very use
ful if you
don't have access to the LS1010.

  So here is a short router configuration

interface ATM3/0
  ip address 192.1.1.1 255.255.255.0
  atm pvc 1 0 16 ilmi <<<<<<<< Need to enable ilmi
  no atm ilmi-keepalive
  atm ilmi-pvc-discovery subinterface <<<<<<< Will auto detect the PVC's come
to router from LS1010.

sh atm vc
                VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cell
s Sts
3/0 1 0 16 PVC ILMI UBR 155000
                UP
3/0 3 0 100 PVC-D SNAP UBR 155000
           UP
3/0 4 5 55 PVC-D SNAP UBR 155000
            UP

So PVC's 0/100 and 5/55 have been detected from the LS1010.

  - Kevin

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3