From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Tue Nov 07 2000 - 01:48:00 GMT-3
IPX RIP does NOT support disabling split horizon. This is to comply with
the Novell specification. Use EIGRP or point-to-point subinterfaces.
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
Sent: Tuesday, 7 November 2000 5:32 p.m.
To: ccielab@groupstudy.com
Subject: IPX RIP - Can't see a remote site
I have the following:
______R2
/
R1---<
\______R3---------R4
IPX RIP is running. R1 sees everything. R2 sees only R1. R3 sees
everything but R2. R4 sees everything but R2. It looks like maybe a split
horizon issue but I know for IP, frame interfaces automatically disable
split except for p-to-p subint's. I can't find a split horizon command
under 'no ipx ?' or 'ipx router rip ?'. Originally, I had FR map statements
on R1s major Se int. I tried moving the config to a multipoint
subinterface. Still no luck. Anybody know whassup?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3