From: Paul.McClarnon@xxxxxxxx
Date: Tue Nov 07 2000 - 22:19:47 GMT-3
According to Caslow, for ospf point-to mutlipoint, you cannot have a
frame-relay map statement as well as the interface-dlci command under the same
interface, This is supposed to stuff up the mappings. Was this true for older
ios versions , as I am running it as follows and it works fine-
I don't know if it makes a difference that I am running traffic-shaping!!
I interface Serial0
ip address 57.3.160.1 255.255.255.128
encapsulation frame-relay
ip ospf network point-to-multipoint
bandwidth 512
frame-relay traffic-shaping
frame-relay map ip 57.3.160.4 104 broadcast
frame-relay map ip 57.3.160.8 108 broadcast
class admin
frame-relay interface-dlci 104
class 16k
frame-relay interface-dlci 108
class 16k
frame-relay interface-dlci 109
Paul
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3